|
[China]
Trade Verify
Address: Room 1002 A Building XuHong Mansion NO.3 Beijing Road Cangzhou City Hebei Province China
Contact name:Arno Hao
Cangzhou Best Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
Steel Iron 2&3 Waves Crash Barrier Highway Guardrail Roll Forming Machine
One machine produce two profiles, 2 beams and three beams,rollers on shaft, when change different profile, just take off the whole groups rollers.
Our factory also produce 5mm u post machine and hydraulic punching machine,if you have profile drawing, we can produce according to your request.
Machine Specifications
| Article No. | Item Name | Specification |
| 1 | Material of panel | GI |
| 2 | Thickness of feeding material | 3.0-4.0 mm coil sheet |
| 3 | Roller station | 15-25 stations |
| 4 | Shaft Diameter | 90 mm |
| 5 | Productivity | 12-15 m/min |
| 6 | Rollers' material | Bearing steel |
| 7 | Shaft material | GCR 15 |
| 8 | Weight | 10 tons |
| 9 | length | 16 m |
| 10 | Voltage | 380V 50Hz 3phases |
| 11 | Control | PLC |
| 12 | Decoiler | 6 tons |
| 13 | Motor | 7.5 kw |
| 14 | Driving way | Chain transmission |
| 15 | Chain size | 0.6-2 inch |
| 16 | Cutting system | Hydraulic cutter |
Working Flow:
Decoiler→Flating→Feeding & punching→Forming→Cut to length→Colletion(finish goods)
Main Of Machine Parts:
1. Manual Uncoiler:
Usage: It is used to support the steel coil and uncoil it in a
turnable way. The steel coil is uncoiled by hand.
Loading capacity: 5T
2. Automatic Steel Highway Guardrail Roll Forming Machine Feeding
Table:
Put the raw material through the beach to manufacture and process,
it can guarantee that the products are neat. Parallel and
everything is uniformity. Please refer to the equipment regulation
to know the function of locate angle iron.
3. Automatic Steel Highway Guardrail Roll Forming Machine Main Roll
Forming Machine:
Material of rollers: 45# steel, roller surfaces polishing, hard
plating. The polished surface and the heat treatment towards the
molds also can keep the molding. Plate surface smooth and not easy to be marked when
it is being stamped
Main motor power: 37kw
Station: adopt cast iron HT50
Decelerating motor: BWD14-43-37KW, made in Shanghai or Changzhou
Drive: gimbal driving,120*500
Main shaft dia: ￠100mm material: 45﹟forge steel
Roller material: GCR15 quenched 58°-62°,chromed
Roll station:15stations
Roller thickness: 2-3mm
Timing by transducer:5m--20m/min(not including punching)
Transducer: Panasonic made in Japan. 380V 50HZ
Computer: PLC
Computer operating panel: touching screen
4. Automatic Steel Highway Guardrail Roll Forming Machine Hydraulic
System:
Hydraulic oil:40#.
Hydraulic oil into the hydraulic oil tank, the pump drives the cutter machine to begin the cutting job.
5. Shearing Mechanism: It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. Material of blades: Cr12, quenching treatment.
Our service:
We provide the technical support for whole life. Meanwhile, if any parts go broken and not artificial damage, we will send you new ones for free. When need the technician to go abroad, we will arrange the technician.But the buyer should take all the cost, including Visa, Roundtrip ticket,suitable accommodation and pay the service fee to the technician with $100/days.
