|
[China]
Trade Verify
Address: Room 1002 A Building XuHong Mansion NO.3 Beijing Road Cangzhou City Hebei Province China
Contact name:Arno Hao
Cangzhou Best Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
Color Coated Steel Sheet Ridge Cap Roll Forming Machine/ Tile Press for Ridge Cap
| Technical Parameters (depending on specific requirements of users) | ||
| Suitable steel plate | Type | Color steel plate |
| thickness | 0.3-0.8mm | |
| Feeding width | As users needs | |
| Effective width | As users needs | |
| Production speed | 8-12m/min | |
| Roller stand | 14 rows | |
| Diameter | 60mm | |
| Main power | 4kw | |
| Pump power | 3kw | |
| Side panel of machine | 14mm | |
| Roller material | Carbon Steel 45# | |
| Blade material | Cr12, quenched | |
| Control system | PLC control | |
| PLC control | 380V 50Hz 3phases(changeable as needs) | |
| Main structure of the machine | 300mm H-Beam | |
Other components
Un-coiler:
5 tons passive decoiler
Coil inner Diameter: 460-520mm
Max out diameter of the coil: 1500mm
Max Coil Width: 1250mm
Cutting:
(1) Cutting motion: The main machine stops and then cut automatically. After cutting, the main machine re-starts automatically.
(2) Material of blade: CR12 with heat treatment
(3) Length measuring: Automatically
(4) The cutting thickness: 0.3- 0.8mm
(5) Hydraulic Station Power: 4 KW
Hydraulic Station
It is controlled by wheel oil pump. After filling the hydraulic oil into
the hydraulic oil tank ,the pump drive the cutter machine to begin the
cutting job.
Components: The system includes a set of hydraulic tank, a set of hydraulic
oil pump, two hydraulic pipes. and two sets of electromagnetism valves.
Out table:
It adopts welded steel and supported roller to transmit the products.
Size:1500*1350*1000mm
Control Box
(1) Power supplier: 380V, 50 Hz, 3Phase (adjusted with the requestment)
(2) length & quantity measurement automatically;
(3) length & quantity controlled by PLC
(4) Length inaccuracy can be amended easily.
(6). Control panel: Button-type switch and touch screen
(6) Unit of length: millimeter (switched on the control panel)
