Industrial Galvanized Steel Walkways Catwalk

Steel Grating For Industrial Plant Construction Engineering Customized Steel Grating Industrial Steel Grating

Kaiheng can make steel grating as your requirement

Product introduction and application scenario of hot dip galvanized steel grating .

Steel grating is an open steel member which is orthogonally combined with bearing flat steel and cross bar according to a certain spacing and fixed by welding or press lock; The cross bar generally adopts twisted square steel, round steel or flat steel, and the material is divided into carbon steel and stainless steel.

Steel grating is mainly used for steel structure platform plate, ditch cover plate, step plate of steel ladder, building ceiling, etc.
Steel grating is suitable for alloy, building materials, power station and boiler. Shipbuilding. Petrochemical, chemical and general industrial plants, municipal construction and other industries have the advantages of ventilation, light transmission, anti-skid, strong bearing capacity, beautiful and durable, easy cleaning, simple installation and so on. Steel grating has been widely used in all walks of life at home and abroad. It is mainly used as industrial platform, ladder pedal, handrail, channel floor, railway bridge side road, high-altitude tower platform, drainage ditch cover, well cover, road grating, three-dimensional parking lot, fence of organs, * *, factories, enterprises, sports yards, gardens and villas, as well as external window of residential houses, balcony guardrail, guardrail of Expressway and railway, etc.

Steel grating surface treatment

Hot dip galvanizing, cold galvanizing, painting, no treatment.

Steel grating plate welding needs  attention below:

1. At each intersection of load flat steel and cross bar
It shall be fixed by welding, riveting or press lock.
2. Pressure resistance welding or arc welding is preferred for the welding of steel grating.
3. The press lock of the steel grating can be fixed by pressing the cross bar into the load flat steel with a press.
4. The steel grating shall be processed into shapes of various sizes according to the needs of users.
5. The spacing between load flat steel and the spacing between cross bars can be determined by the supplier and the demander according to the design requirements. As an industrial platform, it is recommended that the spacing of load flat steel should not be greater than 40mm and the spacing of cross bars should not be greater than 165mm.