H-beam is a kind of economical section with more optimized section
area distribution and more reasonable strength-weight ratio. It is
named because its section is the same as the English letter "H".
Due to the right-angle arrangement of all parts of H-beam, h-beam
has been widely used for its strong bending resistance, simple
construction, cost saving and light structural weight in all
directions. An economic section shaped like a capital Latin letter
H, also known as universal steel beam, wide flange (edge) I-steel
or parallel flange I-steel.
The cross-section of h-beam steel usually consists of a web and a
flange, also known as the waist and the side. The flange of h-beam
is parallel or close to the plane, flange ends are at right angles,
hence the name of the parallel flange
I-steel. The web thickness of H-beam is smaller than the ordinary
I-steel with the same height of the web, and the flange width is
larger than the ordinary I-steel with the same height of the web,
so it is also named wide flange I-steel.
Determined by the shape, the section modulus, moment of inertia and
corresponding strength of H-beam are obviously superior to ordinary
I-beam with the same single weight. When used in different metal
structures with different requirements, it shows its superior
performance no matter under bending moment, pressure load and
eccentric load, and can greatly improve the bearing capacity
compared with ordinary I-steel, saving 10%~ 40% of the metal.
H-beam has wide flange, thin web, many specifications and flexible
use, which can save 15% ~ 20% of metal in all kinds of truss
structures. Because the flange inside and outside is parallel, the
edge end is a right Angle, easy to assemble and combine into
various components, thus can save about 25% of the workload of
welding, riveting, can greatly accelerate the construction speed of
the project, shorten the construction period.