Wuxi Guangcai Machinery Manufacture Co., Ltd |
|
GWC14.5-80-1120 Assembled Silo Corrugated Sheet Roll Forming Machine
This machinery is integrated into the design and
manufacturing for many years of our experience, including the
design concept and advanced processing technology. The equipment is
good in stability. Our products can totally automatic control,
convenient operation, high efficiency. Our machinery can produce
many type of products, such as cut off type and pressure type.
Now, the assembled silo that is composed of galvanized corrugated
sheet is widely used for the purpose of commercial grain storage
around the world, and our GWC14.5-80-1120 assembled silo corrugated
sheet roll forming machine is especially designed to manufacture
such steel sheets.
Features
1. This machine is designed to process steel coil into corrugated
sheet with desired specification in one step, and this is available
even for thicker steel.
2. Our product makes use of rollforming technology to fabricate the
corrugations one after another, resulting in released internal
stress, reduced spring back effect as well as improved product
quality.
3. This corrugated sheet roll forming machine is most popular one
among similar products on the market, and it can be tailored to
best fit every customer's needs if relevant drawings are supplied.
Meanwhile, the production process, including two options, is up to
the customer.
a. Form the straight sheet with corrugation first, and then punch
holes and curve the sheet outside the production line.
b. Shape forming, punching, curving and shearing operations are
finished on the same production line automatically. There would be
no straight edges on the sheet, thus the assembly is easy and the
productivity is enhanced.
Patents
Our corrugated sheet roll forming machine has gained several
patents, and here are some brief introductions.
1. One feeding device for curved corrugated sheet production line
(ZL201020606332.1). It has the advantages of universal application,
high automation level, safe and reliable operation, etc.
2. One bidirectional curving machine (ZL201120054585.7). It has
upper and lower curving rollers, and the continuous curving method
avoids straight edge on both sides of the sheet. As a result, the
finished sheet is aesthetic and allows simple assembly.
3. One curved corrugated sheet forming line (ZL201120055257.9).
There is a slitting machine at the back end to cut off the extra
sheet in the transverse direction (width direction) which is caused
by the rolling process, and the cut parts are collected by an
automatic recycling device. With a simple structure, this sheet
forming line is able to deliver reliable performance, thereby
improving working efficiency and lowering labor cost.
4. One three-station punching machine (ZL201120055225.9). It uses a
three-station punching die to conduct complete punching treatment
to the corrugated sheet. It shows the advantages of high precision,
low deviation and simple construction.
5. One curved corrugated sheet shearing machine (ZL201020606306.9).
This is a universal device, and it uses the handwheel to adjust
shearing angle and height.
Composition
This corrugated sheet roll forming machine consists of several
parts, as listed below.
1. 10T hydraulic decoiler
2. Straightening machine
3. Shape forming machine
4. Punching machine
5. Curving machine
6. Hydraulic shear
7. Hydraulic station
8. PLC control cabinet
9. Stacker
Specifications
Model |
GWC14.5-80-1120 | Note | |
Applicable material | Galvanized sheet | This machine is customizable upon each customer's requirements and the characteristics of processed material. |
Feeding width | 1250mm | |
Processing thickness | 1-5mm | |
Roller material | Ball bearing steel which goes through heat treatment and surface finish process. | |
Main motor power / hydraulic station power | 90kW / 75kW | These parameters can be set according to the required production capacity. |
Forming passes | 18 | |
Forming speed | 1-2 pieces/minute | |
Machine dimensions | 32×8×2.5m | |
Machine weight | 110T |