The casting on Clamping increases the grasping force, meanwhile
does not scratch the material
|
[China]
Trade Verify
Address: No. 12, Jingshun Road, Yixingbu, Tianjin, China
Contact name:Angela Xu
Tianjin Ejon Flying Science And Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
1) Using mechanical hand alternately feeding structure, the stability of the feeding process is effectively guaranteed.
2) Double ball screw with nylon gear, the feeding speed of the machine is greatly improved.
3) The material clamp is made of structural castings which avoids
scratching the material while improving the feeding holding power.
SPECIFICATIONS | ||||||
Feeding system | Double ball-screw alternate feeding system | |||||
Slotting System | Plane cutter slotting system | |||||
Bending System | Double blades alternate bending system | |||||
Suitable Material | Stainless steel, Galvanized steel, Aluminum plate | |||||
Material Height | Stainless steel,Galvanized steel,Aluminum plate: 20~120mm | |||||
Material Thickness | 0.4~1.2 mm | |||||
Accuracy | ±0.1 mm | |||||
Min. Bending Angle | R6 | |||||
File Format | Dxf.Plt.Ai | |||||
Power | AC220V, 50Hz, 2.0kW | |||||
Air Supply | 0.6m3/Min | |||||
Control System | 4 axis control system (2 axis servo control) | |||||
The casting on Clamping increases the grasping force, meanwhile
does not scratch the material
The double ball screw of feeding design ensure the feeding speed
and precision as well as stability
High strength alloy cutters are used for slotting knifes, each
knife has 8 angles, no need to sharpen, greatly improve the working
life.
Precision casting is used to ensure the performance of the encoder module which is the key component of the the relational equipment's precision.
To use the device, you need to install the control card in your
computer and then connect to the bending machine and install the
software.Computer configuration : XP system or window7 32-bit system, and requires a PCI card slot to
install the control card.
The use of equipment should be equipped with air compressor, we suggest that the selection of more than 4kw, the gas flow is 0.6m³/Min.
The software of bending machine is self-developed. Import file
format supports .Dxf.Plt .AI We recommend using Coredraw or adobe illustrator to complete the file after the export file to.Dxf.Plt.Ai format.
Then open the operating software, select the document.
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
* Training how to install and use the machine.
* Engineers available to service machinery overseas.
Packaging | ||
Size | 1330(L) * 740 (W) * 1500(D) | |
Weight | 350 | |
Packaging Details | The normal package is fumigated wooden box(Size: L*W*H). If
container is too tight, we will use PE film for packing or pack it
according to customers' special request. | |
