Active Member
|
[China]
Address: 11F, BUILDING 1 KINGBOARD PLAZA, NO. 505 GUANGMING ROAD, HUAQIAO, KUNSHAN, JIANGSU, CHINA
Contact name:HAN
Kunshan Brave Tech Co.,Ltd. |
|
|
Steel Coil Slitting Machine Sheet Straightening Machine Metal Cut To Length Controller
Application:It is suitable for the longitudinal shearing of the metal coils and
rewinding coils.
Advantages:Easy to operate, slitting quality is high, excellent material
utilization, Stepless shearing speed regulation, etc.
Structure:It consist of uncoiler, feeding and positioning, slitting unit,
recoiler, etc.
Applicable Materials:Tinplate, silicon steel, aluminum, copper, stainless steel and
galvanized steel, etc.
Composition: it is composed of feeding car, uncoiler, demolition of
the entrainment feeding machine, leveling machine, looper, sizing
device, shearing machine, conveyor, chopping board system;
High performance PLC programmable control system control;
Structural design of reliable hydraulic pneumatic system, high
strength and high rigidity
| No. | Com modity | Raw mate rial | THK (mm) | Width (mm) | ID (mm) | OD (mm) | weight (T) | Length arrarge (mm) | Slits (mm) | Slit tole rance (mm) | Smoo thness (mm /m2) | Speed (m/ min) | Capa city (KW) | Flood space (m) |
| 1 | 6.0*1600 | stain less steel ,Cold-Rollrd ,Galv nized coil Q235, Q345, B510 | 1.0-6.0 | 600- 1600 | Φ508/Φ610 | ≤Φ2000 | ≤35 | 1000-12000 | ≤±0.5 | ≤±1.5 | ≤1.5 | ≤30 | ~155 | 35*8 |
| 2 | 8.0*1600 | 2.0-8.0 | 600- 1600 | Φ508/Φ610 | ≤Φ2000 | ≤35 | 1000-12000 | ≤±0.5 | ≤±1.5 | ≤1.5 | ≤30 | ~180 | 35*8 | |
| 3 | 9.0*1600 | 2.0-9.0 | 600- 1600 | Φ508/Φ610 | ≤Φ2000 | ≤35 | 1000-12000 | ≤±0.5 | ≤±1.5 | ≤2.0 | ≤20 | ~195 | 35*8.5 | |
| 4 | 10*1600 | 2.0-10 | 800-1600 | Φ508-Φ760 | ≤Φ2000 | ≤35 | 1000-12000 | ≤±0.5 | ≤±1.5 | ≤2.0 | ≤20 | ~240 | 42*8 | |
| 5 | 12*2000 | 3.0-12 | 1000-2000 | Φ508-Φ760 | ≤Φ2000 | ≤35 | 1000-12000 | ≤±0.5 | ≤±1.5 | ≤2.0 | ≤16 | ~255 | 50*10 | |
| 6 | 12*1800 | 3.0-12 | 800-1800 | Φ508-Φ760 | ≤Φ2200 | ≤35 | 1000-12000 | ≤±0.5 | ≤±1.5 | ≤2.0 | ≤16 | ~255 | 50*10 | |
| 7 | 16*2000 | 4.0-16 | 1000-2000 | Φ508-Φ760 | ≤Φ2200 | ≤35 | 1000-12000 | ≤±2.0 | ≤±3.0 | ≤2.0 | ≤12 | ~275 | 50*10.5 | |
| 8 | 20*2200 | 5.0-20 | 900-2000 | Φ508-Φ760 | ≤Φ2200 | ≤35 | 1000-12000 | ≤±2.0 | ≤±3.0 | ≤3.0 | 10-16 | ~220 | 29*9.6 | |
| 9 | 22*2200 | 5.0-20 | 900-2000 | Φ508-Φ760 | ≤Φ2200 | ≤35 | 1000-12000 | ≤±2.0 | ≤±3.0 | ≤3.0 | 10-16 | ~220 | 29*9.6 | |
| 10 | 25*2200 | 5.0-25 | 900-2000 | Φ508-Φ760 | ≤Φ2200 | ≤35 | 1000-12000 | ≤±2.0 | ≤±3.0 | ≤3.0 | 10-16 | ~220 | 3 |
1.The machine employs three structure , 2-high,4-high,6-high and can be matched with multi-group support rolls.
2.Straightening roll material: 42CrMo, GCr15, 9CrSi and 9Cr2Mo is available for selection.
3.Straightening roll treatment: stress relief by quenching and tempering, quenching (HRC54, HRC60), hard plating treatment for cold plate, stainless steel plate and leveling roll surface.
4.Reducer: ZQ standard reducer, ZY reducer and TR reducer with hard tooth surface is available for selection.
5.Distribution box: self-made; it employs one-stage drive and two-stage distribution structure, and its gear is the 20CrMnTi penetration gear.
6.Universal connecting shaft: automobile universal shaft and universal roll for the metallurgical industry.
7.Adjustment methods: manual and electrical adjustment.
8.Lubrication methods: mainly focus on lubrication operated by manual or electric pump.
9.Applications: applicable for general leveling for carbon steel plate, stainless steel plate.
10.We can design and produce for special requirements.
