Kunshan Brave Tech Co.,Ltd. |
|
Hydraulic Drawing Stretching Machine Making Pot and Pan Hydraulic Pressing Machine
According to your product picture and dimension, the production
process is (1) material cutting, (2) stretching, (3)bulge, (4)edge
trimming, (5) punching holes.
Normally you can buy the round aluminum piece from the market, so
this offer doesn't mention the material cutting machine.
According to your product picture, we suggest the rubber bulge way
to form the pot body, not the water bulge way.
The polishing, washing, oxidation, etc after edge trimming step are
not offered in this quotation. If you want, we will offer you
later.
The offered machines above have these production capacity:
FAST HYDRAULIC STRETCHING MACHINE Y28-200K: 600pcs/h
TRIMMING MACHINE KE-320: 300pcs/h
PUNCHING MACHINE JH21-80: 600pcs/h
Please decide the machine order quantity according to your planned production output that you want. You can also inform us your planned production output, so that we can suggest you the needed machine quantity.
According to your product dimension, we suggest the FAST HYDRAULIC
STRETCHING MACHINE Y28-200K.
For punching holes of couscous pot, we suggest the PUNCHING MACHINE
JH21-80.
Y28C-300 hydraulic bulging machine profile drawing and the main performance and features, technical parameters
1, Main performance
1) With a rapid mold closing and parting, slow mode-locking
2) Clamping pressure adjustable
3) Independent water supply
4)There are many times bulging for pressure
2, Features
1) Frame structure, workbench can run accurately
2) With high pressure water overflow protection, safe operation
3) The oil supply system is placed on top of the machine and is
separated from the water supply system to ensure that the hydraulic
oil does not enter the water
4) Automatic exhaust device, make water expansion mould pressure
evenly
3, Y28C - 400 Oil Press Main Technical Parameters
NO. | ITEM | UNIT | Y28-200K | |
1 | Nominal Pressure | KN | 2000 | |
2 | Main-Cylinder Nominal Pressure | KN | 1500 | |
3 | Main-Cylinder Hydraulic System Pressure | Mpa | 20 | |
4 | Main-Cylinder Max. Stroke | mm | 560 | |
5 | Main-Cylinder Up & Down Speed | Fast Down | mm/s | 400 |
Working Speed | mm/s | 57/36 | ||
Fast Up | mm/s | 330 | ||
6 | Max. Closed Height | mm | 960 | |
7 | Working Table Size (LR x FB) | mm | 700*990 | |
8 | Min. Closed Height | mm | 400 | |
9 | Side-Cylinder Pressure | KN | 500 | |
10 | Side-Cylinder Max. Stroke | mm | 280 | |
11 | Motor Power | KW | 47 |
Aluminum straight barrel inner embossing electric cooker stamping production process