Active Member
|
[China]
Address: No. 86, jingsan Road, Jinshui District, Zhengzhou,China
Contact name:John Jiao
Henan Mine Crane Co.,Ltd. |
|
|
LDP Model 1T,3T,5T Remote or Pendent Line Control Electric Single-girder Crane
Product desciption:
LDP electric single-girder crane is a small-size low headroom
crane. The electric hoist is at one side of the girder, which
increases the work space of the hook and reduces the workshop
height and cost. It is applicable to the places where the
workshop’s headroom is low.
The crane is composed of box-shaped girder weld by steel plates,
end girder, crab and travelling mechanism. The crab consists of
traveling end airder, crab frame and fixed electric block. The crab
is partially hung and runs at one side of the g rider. The electric
hoist is raised to the upside of the girder from under the girder,
which effectively increasing the lifting altitude. The crab is
braked by conical motor and driven by exposed gear
The girder,of box-shaped structure and bias rails, has horizontal
wheels at the upper and the lower, so that it is safe and reliable
and can avoid rai gnawing.
The trolley adopts separate drive, conical motor brake and exposed
gear drive. The travelling motor can be soft start motor and
variable-frequency adjustable-speed motor according to user
requirements. The crane can start steadily and runs safely and
reliably
it has three operation modes: ground handle, wireless remote
control and cab. The cab has two types: open cab and closed cab.
The span o it is 7.5~22.5m (subject to non-standard design
according to user’s requirements). The classification group is A3,
and the operating ambient temperature is -25℃~40℃.
Sketch:
Technological parameter:
| Capacity(t) | 1t, 2t, 3t, 5t | 10t | 16t |
| Span(m) | 6.5m---28.5m | ||
| Lifting height(m) | 3m---30m | ||
| Control mode | Pendant control, wireless remote control, cabin control | ||
| Lifting speed(m/min) | 2.8 ,8 , 8/0.8 | 2.3 , 5/0.8 7, 7/0.7 | 4, 4/0.4 |
| Traveling speed(m/min) | 20,30,45 (Inverter) | ||
| Service class(work grade) | a) M2, M3: used in places of mild service, such as workshop and
warehouse. b) M4: used in places of Medium service such as assembly and depot. | ||
| Supply power(three phase power) | 380V 50HZ 3Phase (according to user require) | ||
| Hoist type | Wire rope or chain hoist, single or double speed | ||
| Working ambient temperature | -20 °C~ <55°C. | ||
| Note | It’s not suitable for lifting blazing & melting metal or toxicant as well as explosion-proof or insulating working conditions. | ||
FAQ:
A: Can you provide custom service?
B: Yes, of course. We are manufacturer and we have our own engineer
group. They can work out customized design according to your
requirement. The most important thing is that you should tell us
what you need.
A: Are there any professional technicians to assist our
installation?
B: Yes. We have a professional installation team, who has already
been to many countries to assist the installation. If you need our
technicians to offer this service, please let us know in advance.
So that we can arrange the suitable technicians to your country.
A: Whether or not you can offer the matched spare parts?
B: Yes, as a crane manufacturer, we can offer all the related spare
parts. Such as motor, hoists, drums, wheels,grabs, hooks, rails,
travel beams, enclosed bus bar, etc.
A: How can you ensure the quality?
B: Before delivery, every product will be tested strictly and we
will send you the quality certification. You are also warmly
welcomed to our factory to make the inspections.
