40 Meter 30 Ton QL type Steel Factory Double Hoist Overhead Crane
Electric System:
1. Control panel protection degree is IP54;
2. Reasonable components installation, convenient for check and
maintenance;
Safety Protection Devices:
Overload limiter, limit switch, interlocking protection devices,
buffer, track sweep plate, bus bar protection board, anti-collision
device, main disconnecting switch, emergency stop system and motor
overload protection.
Grus grus on her head, Girder, from the individual to the Lord I
cried with a child, and the ability to move the electromagnet is a
lot of iron, of iron, and of brass: And the legs of pipes,, p. This
is from a crane beam that motion mechanisms elevation of the car
and the electrical parts of the electromagnetic spreader. The force
of the electromagnet of this, over the bridge of a crane that can
last for 10 minutes of suction, after the shutdown. The shape of
electromagnetic spreader can be customized according to the
material to be lifted out of shape.
There are 2 types of electromagnet spreader: electromagnetic chuck
and electromagnetic beam. And electromagnetic beam can also be 2
kinds: non-rotating beam (vertical or parallel to main girder) and
rotating beam (Upper beam or hanging beam).
Sketch Drawing
Technical Parameters
Lift capacity | t | 5 | 10 | 16 |
Working system | A6 |
Span | m | 10.5 13.5 16.5 19.5 22.5 25.5 28.5 31.5 |
Max. Lift height | m | 16m |
speed | Hoist | Magnetic | m/min | 15.6 | 13 | 13 |
Crab traveling | 39.5 | 43.8 | 44.5 |
Trolley traveling | 92.7 /93.7 | 92.7 /93.7/ 86.4 | 76 /89 |
Electromagnetic disk | Model | MW-16 | MW-16 | MW-16 |
Attracting weight kg | KG | 3330 | 8330 | 14330 |
Dead weight kg | 1670 | 1670 | 1670 |
Diameter | mm | 1180 | 1180 | 1180 |
Steel track recommended | 43kg/m |
Power supply | 3-phase A.C. 50HZ 380V |
Main features:
1. Three types of cabin entrances: end, side and top entrances;
2. The rotating part of the hook must be locked with screws during
electromagnetic plate work;
3. Its lifting capacity includes the weight of the electromagnetic
part, and the weight of the whole crane does not include the weight
of the electromagnetic chuck and its components;
4. The box girder structure is welded in high strength by robots;
5. Wheels, winding drums, gears and couplings are made by CNC with
the best quality;
6. Heavy duty slip ring motor from Wuxi NGP, best quality in China;
7. Electrical equipment from German Siemens
8. Independent control system: wireless control or cabin control;
9. Lifting overload protection device;
10. Polyurethane buffer;
11. Crane travel limit switch;
12. Protection against decompression;
13. Emergency stop device;
14. Current overload protector.