Autoclave Class Tabletop Steam Autoclave Sterilizer For Lab

Autoclave Class Table Top Steam Cheap Autoclave Sterilizer for Lab

Description

• When double door autoclaves are placed into a BSL-3 or BSL-4 laboratory, several decisions should be reviewed by the lab planner and/or architect.
• The penultimate result of the decision process should always be in favor of public and operator safety.
• The type of science being performed in the laboratory dictates the design and space requirements for the facility as well as the equipment necessary to operate the facility safely and efficiently

.

Features

1. Adopting European N standard, with thermal vacuum and drying functions, it can be used for A-type hollow instruments and solid instruments. Thermodynamic vacuum guarantees elimination of cold air from the cavity and makes sure that reaches the optimal effect of sterilization.
2. Specially design for dental clinic field, it could sterilize 12 pieces hand piece at same time, simply and efficiently.
3. Microprocessor control, LED display and modularized panel for easy operation.
4. Automatic malfunction detection system makes easy maintaining.

Technical Chart

Autoclave Piping And Components

Specifically designed for use with steam systems that demand the highest safety conditions. 316L grade stainless steel is used for the chamber, piping and fittings. The inner chamber walls have a mirror like polished finish (Ra < 10μm) to create a smooth surface.

Chamber Drain Valve Area

The chamber drain valve area is the coldest spot in the chamber. The BSL autoclaves resolve this problem by applying steam directly to the chamber drain valve area.

The hot-well is a stainless steel water reservoir in which the feed water is heated to 80-90°C prior to entering the steam generator. The hot-well facilitates the removal of non-condensable gases out of water.

Safety Valve

A safety valve is fitted to the chamber. Steam blasts from the safety valve are captured and condensed in an expansion vessel (optional) and then decontaminated before discharge to drain. Any remaining gases are treated via a microbiological sanitary air filter (optional).

Diaphragm Valves

Separate diaphragm valves (optional) for steam to the jacket and chamber prevent contamination from entering the valve mechanism.

Tri-Clamp Fittings

Tri-clamp fittings provide uniformly smooth and crevicefree self-aligning joints for non-contaminating steam flows. They minimise the possibility of external contamination penetration through the valves and piping connection areas.

Separate Jacket And Chamber Connections

Biological Seal

The bio-shield is a barrier whose purpose is to create a complete hermetic seal between the differently qualified zones, providing maximum biological containment between the zones. The bio-shield system meets BSL3 and BSL4 bio-safety levels using a combination of stainless steel plates and flexible neoprene wall seal to prevent micro-organisms from passing between zones.

Jacket Frame

A fully welded metal flange with threaded studs surrounds the jacket. A counter plate is attached to the flange using the nuts provided. Any necessary fittings for electrical connections pass through this section of the bio-shield via specially sealed conduits.

Wall Frame

A wall frame is built into the concrete wall of the building. Continuous neoprene sealing is used to seal the sterilizer completely in the aperture in the wall.

Brochure load down from here

Medpharm medical large steam autoclave brochure.pdf