3A BPE TP316L Hygienic Sample Valves Stainless Steel With Weld Connection Type

3A BPE TP316L Stainless Steel Hygienic Sampling Valves 1/2"-4"

Sanitary Sample Valves

Over 300 standard options of valves are available in Tri-clamp, NPT & Weld Body in Inline, 90 Degree and 45 Degree configurations. Complete cleaning is obtained inside of a stainless steel Laboratory washing chamber with detergent and rinse agent circulated in the chamber via rotating spray arms as well as through injectors directly inside of valves and dried via HEPA filtered air.

When choosing a Sampling Valve, different factors have to be considered:

• The material, pressure and temperature rating, gaskets, size and position of the valve according to the pipe specification of the plant.
• The handle or actuator type according to the position (reach) of the valve and depending of the chemical to sample (i.e. if the product contains solid particle or not)
• The receptacle to store the sample for transportation (bottles, container, bag, piston injector or syringe)

.Materials

Materials: AISI-316L
Size: DN8
Diaphragm: Silicone (for standard valve), EPDM (for valve with micro type connector)

Standard Design

Aseptic sampling valve is made from three parts: valve body, valve head and one piece of diaphragm. A rubber diaphragm valve is put at the axis of valve head, acting as an extensible valve core.

• End connections can be welded, clamped or threaded, only one size DN8 available.
• Handle type: rotary handle, key handle
• Valve open: sampling valve close: sterilization

Quality & Inspection:

• PMI test to verify material grade
• Dimension controlling during fabricating and finished
• Visual and surface 100% examination before shipment
• Packed in carton box firstly, then in wooden case
• Third party inspection available.

A Sampling Valve is a type of Valve used in process industries that allows taking a representative portion of a fluid(gases,liquids,fluidized,solids or slurries)to test (e.g. by physical measurements, chemical analysis, microbiological examination), typically for the purposes of identification, quality control, or regulatory assessment. It is a valve used for sampling.

The Sampling Valve allows the operator to extract a sample of the product from the production line or reactor and safely store it for transportation to the laboratory where it will be analysed or to the archive room where it can be retrieved for further use.

In chemical plants,a sample can be taken during the process to ensure that the output meets specifications (or that the quality is acceptable), before shipping the chemical good or before accepting the chemical product.

Strength:

• Material of stainless steel 316L and 1.4404 is from reputed mill to guarantee the chemical composition and mechanical properties. Material certificate will be submitted follow to orders.
• Forged valve body and disc to control the leakage and visual.
• Superior facilities and good experiences for fabrication.
• In ability to improve and develop new design.
• Fast delivery is possible to meet your needs well in time.
• Low cost from bulk production will reduce your budget and improve your business.
• Small quantity available.