Active Member
|
[China]
Contact name:Jason
XinXiang XinLi Filter Technology Co., Ltd. |
|
|
Stainless Steel 316L Fiber Hot Gas Filter Element For Dust-removing
Production description:
It is made of stainless steel 316L fibers with a micron diameter
through non-woven laying, stacking, and high-temperature sintering,
and then rolled and welded. Usually, the micron rating is 5um,
10um, 15um.
Technical parameters:
| Product ID | OD (mm) | Length (mm) | Filtration area (m2) | Supporting tube | Temperature (°C) |
| XLMFF-1500 | 130/160 | 1500 | 0.61 / 0.75 | Perforated tube/ Support cage | <400 |
| XLMFF-3000 | 3000 | 1.22 / 1.50 | |||
| XLMFF-4000 | 4000 | 1.63 / 2.01 | |||
| XLMFF-5000 | 5000 | 2.04 / 2.51 | |||
| XLMFF-6000 | 6000 | 2.45 / 3.01 | |||
| XLMFF-7000 | 7000 | 2.85 / 3.51 |
Product feature:
1. High temperature resistance(400 ℃), strong thermal shock
resistance, corrosion resistance, high strength
2. Handling high wind speed (≥1 m/min)
3. High interception efficiency, emission concentration can be lower
than 5mg / Nm3
4. Good air permeability, reduced initial pressure, low energy
consumption
5. Online backflush and offline cleaning, good regeneration effect
6. Long working life
Main application:
1. Hot gas filtration during the production of Alumina Oxide
2. Catalyst or precious metal recovery in hot gas processes
3. Power,Steel,Cement,Glass,Chemical,Metallurgical Industry
4. Biomass energy
5.The desulfurization denitration processes
Production and Installation site:
Packaging:
