Beijing Silk Road Enterprise Management Services Co.,LTD |
Verified Suppliers
|
|
Food grade stainless steel sanitary lobe rotor pump high viscosity cooking oil pump
(1) check whether there is any loosening phenomenon in the rotor
pump and pipeline. Turn the rotor pump with your hand to see if the
rotor pump is flexible.
(2) add bearing lubricating oil to the bearing body, observe that
the lubricating oil should be replaced or replenished at the center
line of the oil mark.
(3) unscrew the water plugs of the rotor pump body and pour water
(or pulp) into it.
(4) close the gate valve and outlet pressure gauge of the outlet
pipe and import vacuum gauge.
(5) point motor, see if the motor is turning correctly.
(6) the motor is opened. When the rotor pump is running, the outlet
pressure meter and the imported vacuum pump are opened, and the
gate valve is gradually opened after the proper pressure is
displayed, and the load of the motor is checked at the same time.
(7) as far as possible to control the flow of the rotor pump and
the lift in the range marked on the sign, in order to ensure the
rotor pump running at the highest efficiency point, the maximum
energy saving effect can be obtained.
(8) during the operation of the rotor pump, the bearing temperature
should not exceed 35 of the ambient temperature, and the maximum
temperature should not exceed 80 degrees.
(9) if the abnormal sound of the rotor pump is found, the reason
should be stopped immediately.
(10) when the rotor pump is stopped, shut down the gate valve and
pressure gauge first, then stop the motor.
(11) the rotor pump can be replaced by lubricating oil for 100
hours in the first month of work, and then replace the oil once
every 500 hours.
(12) adjust the packing gland regularly to ensure that the leakage
in the packing room is normal.
(13) regularly check the wear of the axle sleeve, and replace it in
time when the wear is large.
(14) when the rotor pump is used in the winter season, it is
necessary to unscrew the plug of the lower part of the pump body
and release the medium. Prevent frost cracking.
(15) the rotor pump will be discontinued for a long time. All pumps
should be disassembled and dried. The rotating parts and the joint
should be coated with grease and stored properly.
Max Flow | 62m³/h / 272GPM | ||
Seal / Gasket | EPDM | ||
Motor | ABB Motor / Local Motor | ||
Power | 0.55kw ~ 22KW | ||
Voltage | 110V / 220V / 380V | ||
Frequency | 50HZ / 60HZ | ||
Max Pressure | 12 Bar / 174 Psi | ||
Surface Polish | Inner polished & sandblast outside | ||
Machine Processing
| 27 Sets Advanced CNC Machine | ||
Service | OEM / ODM | ||
Delivery | By Sea / By Air / By Express | ||
Payment Terms | 100% TT / 50%TT in advance, balance 50% before delivery |
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is
15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: No.
Q: What is your terms of payment ?
A: Payment<=5000USD, 100% in advance. Payment>=5000USD, 50%
T/T in advance ,balance before shippment.
Packaging & Shipping
Wooden box ,shipping by sea or air.
Warranty time: one year, from the date which the product is
qualified commissioning. Any damage except the wrong operation
during warranty period is repaired freely. But the travel and hotel
expenses should be count on buyer.
Training services: our engineers will train your staff to operate
it during the period of installation and commissioning, and they
will not leave there until your staff can operate it properly and
normally.
Maintenance services: any malfunction happened, once you enquiry
us, we will reply you within 48 hours except the special reasons.
Lifelong services: we provide lifelong services for all the
products we sold out, and supply the spare parts with discount
price.