Wuxi Benchmark Special Steel Co.,Ltd |
Precision Stainless Steel Strip Grade 201 ASTM/EN/JIS Standard
201 Stainless Steel Strip Specifications
Grade 201 stainless steel strip is a lower-cost alternative to
the conventional Cr-Ni austenitic stainless steels, such as 304
strips.
About half of the nickel content of 304 is replaced with alloy
additions of manganese and nitrogen. This results in a higher
strength than 304.
201 stainless steel strip has relatively lower ductility and
formability compared to 301 stainless steel strip.
Grade 201 also has good welding characteristics and low temperature
properties.
Grade 201 stainless steel strip has good formability and corrosion
resistance and this makes it suitable for below applications such
as kitchen equipment and catering equipment.
The good strength ensures suitability in applications such as
stainless steel banding straps, clamps, brackets and cable ties.
The chemical components of grade 201 stainless steel strip is
summarized in the following table:
Grade | Standard | C | Si | Mn | P | S | Cr | Ni | Mo |
201 | ASTM A240 | ≤0.15 | ≤1.00 | ≤7.50 | ≤0.060 | ≤0.030 | 16.00-18.00 | 3.50-5.50 | – |
Grade | Standard | Yield Strength Rp0.2 (N/mm²) | Tensile Strength Rm (N/mm²) | Elongation % | Hardness (HV) | Hardness (HRB) |
---|---|---|---|---|---|---|
201 | ASTM A240 | ≥ 275 | ≥ 520 | ≥ 35 | ≤ 260 | ≤ 101 |
202 | ASTM A240 | ≥ 275 | ≥ 520 | ≥ 40 | ≤ 218 | ≤ 95 |
301 | ASTM A240 | ≥ 205 | ≥ 520 | ≥ 40 | ≤ 200 | ≤ 90 |
304 | ASTM A240 | ≥ 205 | ≥ 515 | ≥ 40 | ≤ 210 | ≤ 92 |
304L | ASTM A240 | ≥ 205 | ≥ 520 | ≥ 40 | ≤ 200 | ≤ 90 |
316L | ASTM A240 | ≥ 177 | ≥ 480 | ≥ 40 | ≤ 200 | ≤ 90 |
316Ti | ASTM A240 | ≥ 205 | ≥ 520 | ≥ 40 | ≤ 200 | ≤ 90 |
317L | ASTM A240 | ≥ 205 | ≥ 515 | ≥ 40 | ≤ 218 | ≤ 95 |
309S | ASTM A240 | ≥ 205 | ≥ 515 | ≥ 40 | ≤ 218 | ≤ 95 |
310S | ASTM A240 | ≥ 205 | ≥ 520 | ≥ 40 | ≤ 200 | ≤ 90 |
Thickness Tolerance:
Thickness(mm) | Width<125mm | 125mm≤Width<250mm | 250mm≤Width<600mm |
---|---|---|---|
≥0.03-0.10 | ±0.06T | ±0.10T | ±0.10T |
≥0.10-0.15 | ±0.01 | ±0.015 | ±0.020 |
≥0.15-0.20 | ±0.015 | ±0.020 | ±0.025 |
≥0.20-0.25 | ±0.015 | ±0.020 | ±0.025 |
≥0.25-0.30 | ±0.018 | ±0.025 | ±0.030 |
≥0.30-0.40 | ±0.020 | ±0.025 | ±0.030 |
≥0.40-0.50 | ±0.025 | ±0.030 | ±0.040 |
≥0.50-0.60 | ±0.030 | ±0.030 | ±0.040 |
≥0.60-0.80 | ±0.030 | ±0.040 | ±0.040 |
≥0.80-1.00 | ±0.030 | ±0.040 | ±0.050 |