|
[China]
Trade Verify
Address: Liangxi District Wuxi ,Jiangsu,China.
Contact name:Helen
Jiangsu Pucheng Metal Products Co.,Ltd. |
|
Verified Suppliers
|
|
|
High Quality Hot Rolled Mirror And Matte 304l Stainless Steel Plate
Hot-rolled stainless steel plate has relatively low strength and poor surface quality (oxidationlow finish), but good plasticity, generally medium-thickness plate, cold-rolled plate: high strengthhigh hardness, high surface finish, generally thin plate, can be used as Stamping board·
| Common number | ASTM | Mechinical Spefication | ||
| Rm Mpa | Y.S.(Mpa) | A5 | ||
| 201 | 201 | ≥520 | ≥275 | ≥40 |
| 1Cr17Ni7 | ≥520 | ≥205 | ≥40 | |
| 301 | 301 | ≥520 | ≥205 | ≥40 |
| 1Cr18Ni9 | ≥520 | ≥205 | ≥40 | |
| 0Cr18Ni9 | ≥520 | ≥205 | ≥40 | |
| 304 | 304 | ≥515 | ≥205 | ≥30 |
| 00Cr19Ni10 | ≥480 | ≥175 | ≥40 | |
| 304L | 304L | ≥485 | ≥170 | ≥30 |
| 309S | 309S | ≥520 | ≥205 | ≥40 |
| 0Cr25Ni20 | ≥520 | ≥205 | ≥40 | |
| 310S | 310S | ≥520 | ≥205 | ≥40 |
| 0Cr17Ni12Mo2 | ≥520 | ≥205 | ≥40 | |
| 316 | 316 | ≥515 | ≥205 | ≥30 |
| 00Cr17Ni14Mo2 | ≥480 | ≥175 | ≥40 | |
| 316L | 316L | ≥485 | ≥170 | ≥30 |
| 316Ti | 316Ti | ≥515 | ≥205 | ≥30 |
| 0Cr19Ni13Mo3 | ≥520 | ≥205 | ≥40 | |
| 00Cr19Ni13Mo3 | ≥480 | ≥177 | ≥40 | |
| 317L | 317L | ≥480 | ≥176 | ≥40 |
| 0Cr18Ni10Ti | ≥520 | ≥205 | ≥40 | |
| 321 | 321 | ≥515 | ≥205 | ≥30 |
| 409L | ≥360 | ≥175 | ≥25 | |
| 410 | 410 | ≥440 | ≥205 | ≥20 |
| 430 | 430 | ≥450 | ≥205 | ≥22 |
| 444 | 444 | ≥480 | ≥310 | ≥30 |
| 410S | ≥420 | ≥290 | ≥33 | |
| 2205/S31803/F51 | 2205 | ≥450 | ≥620 | ≥15 |
| 2507/S32750/F53 | 2507 | ≥550 | ≥800 | ≥25 |
| 630 | ≥520 | ≥785 | ≥18 | |
| 904L/N08904 | ≥490 | ≥216 | ≥35 | |
Product Details
Surface Description
| Surface | Definition | Application |
| No.1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical tank, pipe etc. |
| No.3 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. | Kitchen utensils, Building construction etc. |
| No.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment etc. |
| 2B | Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. | Medical equipment, Food industry, Construction material, Kitchen utensils etc. |
| BA (No.6) | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction etc. |
| Mirror (No.8) | Shinning like a mirror | Building construction, decoration etc. |
| Hairline | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building Construction etc. |
Chemical Composition
| Grade | C | Si | Mn | P | S | Ni | Cr | Mo |
| 201 | ≤0 .15 | ≤0 .75 | 5. 5-7. 5 | ≤0.06 | ≤ 0.03 | 3.5 -5.5 | 16 .0 -18.0 | - |
| 202 | ≤0 .15 | ≤l.0 | 7.5-10.0 | ≤0.06 | ≤ 0.03 | 4.0-6.0 | 17.0-19.0 | - |
| 301 | ≤0 .15 | ≤l.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 6.0-8.0 | 16.0-18.0 | - |
| 302 | ≤0 .15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤ 0.03 | 8.0-10.0 | 17.0-19.0 | - |
| 304 | ≤0 .0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 8.0-10.5 | 18.0-20.0 | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤ 0.03 | 9.0-13.0 | 18.0-20.0 | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 12.0-15.0 | 22.0-24.0 | - |
| 310S | ≤0.08 | ≤1.5 | ≤2.0 | ≤0.035 | ≤ 0.03 | 19.0-22.0 | 24.0-26.0 | |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0- |
| 316L | ≤0 .03 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 12.0 - 15.0 | 16 .0 -1 8.0 | 2.0 - |
| 321 | ≤ 0 .08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤ 0.03 | 9.0 - 13 .0 | 17.0 -1 9.0 | - |
| 630 | ≤ 0 .07 | ≤1.0 | ≤1.0 | ≤0.035 | ≤ 0.03 | 3.0-5.0 | 15.5-17.5 | - |
| 631 | ≤0.09 | ≤1.0 | ≤1.0 | ≤0.030 | ≤0.035 | 6.50-7.75 | 16.0-18.0 | - |
| 904L | ≤ 2 .0 | ≤0.045 | ≤1.0 | ≤0.035 | - | 23.0·28.0 | 19.0-23.0 | 4.0-5.0 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.030 | ≤0.02 | 4.5-6.5 | 22.0-23.0 | 3.0-3.5 |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 6.0-8.0 | 24.0-26.0 | 3.0-5.0 |
| 2520 | ≤0.08 | ≤1.5 | ≤2.0 | ≤0.045 | ≤ 0.03 | 0.19 -0. 22 | 0. 24 -0 . 26 | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤ 0.03 | - | 11.5-13.5 | - |
| 430 | ≤0.1 2 | ≤0.75 | ≤1.0 | ≤ 0.040 | ≤ 0.03 | ≤0.60 | 16.0 -18.0 | - |
Packaging & Shipping
Product Application
FAQ
Q1: ARE YOU FACTORY OR TRADER?
A1: Our company is a cold rolling manufacturer of magnetic stainless steel coil since 2009. We've gained our Export Right and become an integrated company of industry and trade in order to satisfy buyer's multi-request on different material and products.
Q2: WHICH MATERIAL/PRODUCTS YOU CAN PROVIDE?
A2: Stainless Steel Coils / Strips, Stainless Steel Sheets / Plates, Stainless Steel Circles / Discs, Decorative Stainless Steel Sheets.
Q3: HOW TO GET A SAMPLE?
A3: FREE samples are available for your checking and testing. And to get free samples, you need to send us you detailed receiving address (including post code) and your DHL/FedEx/UPS account for collecting samples, courier cost will be paid in your side.
Q4: HOW TO VISIT YOUR FACTORY?
A4: Most of the main cities have flights to Wuxi; you can take flight to Wuxi Shuofang International Airport.
If you come from Shanghai, it will take 2 hours by flight (every day 5 flights).
If you come from Hongkong, it will take 1 hour by flight (every day 1 flight around noon time).
