|
[China]
Trade Verify
Address: No.283-1, Youyi Middle Road, Xishan District, Wuxi City, Jiangsu Province
Contact name:Gao
JIANGSU MITTEL STEEL INDUSTRIAL LIMITED |
|
Verified Suppliers
|
|
|
Incoloy 800H EN 1.4958 Alloy 800H Nickel Base Alloy Plate Sheets and Coils Hot Rolled & Cold Rolled
Material | Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy |
Shape | Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet |
Grade | Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron
100),2304,904L |
Others:253Ma,254SMo,654SMo,F50(UNSS32100)F60,F61,F65,1J22,N4,N6 etc | |
Alloy : Alloy 20/28/31 | |
Hastelloy:HastelloyB/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g | |
Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / DIN W. Nr.
2.4617,Hastelloy C, Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602, Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665 | |
Haynes: Haynes 230/556/188 | |
Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20 | |
Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS
N06601 / DIN W. Nr. 2.4851, Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816 | |
Incoloy: Incoloy 800/800H/800HT/825/925/926; | |
GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044 | |
Monel: Monel 400/K500/R405 | |
Nitronic: Nitronic 40/50/60; | |
Nimonic: Nimonic 75/80A/90/A263 ; | |
Specification | Wire: 0.01-10mm Strip: 0.05*5.0-5.0*250mm Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm |
Product Characteristics | 1.According to the preparation process can be divided into
deformation superalloys, casting superalloys and powder metallurgy superalloys. 2.According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc.. |
Standard | GB,AISI,ASTM,DIN,EN,SUS,UNS etc |
Inspection | ISO,SGS,BV and so on. |
Incoloy 800H (UNS N08810 / W.Nr. 1.4958)
Incoloy 800H (UNS N08810 / W.Nr 1.4958) is an iron-nickelchromium alloy having the same basic composition as Incoloy 800, with significantly higher creep rupture strength. The higher strength results from close control of carbon, aluminum and titanium contents in conjunction with a high temp anneal. The 800H modification was to control carbon (0.05 to 0.10%) and grain size to (>ASTM 5) to optimize stress rupture properties. Incoloy 800H has further modifications to the combined titanium and aluminum levels (0.85 to 1.2%) to ensure optimum high temperature
properties.
| UNS Designation | N08800 | N08810 | N08811 |
| Incoloy Alloys | 800 | 800H | 800HT |
| Nickel | 30.0 - 35.0 | 30.0 - 35.0 | 30.0 - 35.0 |
| Chromium | 19.0 - 23.0 | 19.0 - 23.0 | 19.0 - 23.0 |
| Iron | 39.5 min. | 39.5 min | 39.5 min. |
| Carbon | 0.10 max | 0.05 - 0.10 | 0.06 - 0.10 |
| Aluminum | 0.15 - 0.60 | 0.15 - 0.60 | 0.25 - 0.60 |
| Titanium | 0.15 - 0.60 | 0.15 - 0.60 | 0.25 - 0.60 |
Aluminum + Titanium | 0.30 - 1.20 | 0.30 - 1.20 | 0.85 - 1.20 |
| ASTM Grain Size | Not Specified | 5 or Coarser | 5 or Coaser |
Features
Applications
