Home Companies Spezilla Tube Co., Ltd. (Shanghai)

ANSI B36.10 Seamless Stainless Steel Pipe,Stainless Steel 304 Tube

Contact Us

[China]

Trade Verify

Address: H.Q.803, No.18 Baosheng Road, Songjiang, Shanghai, China

Contact name:Will Ma

Spezilla Tube Co., Ltd. (Shanghai)

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

ANSI B36.10 Seamless Stainless Steel Pipe,Stainless Steel 304 Tube

Country/Region	china
City & Province	shanghai shanghai

Product Details

ANSI B36.10 Seamless Stainless Steel Pipe,Stainless Steel 304 Tube

SPEZILLA TUBE stocks stainless steel Seamless pipe per ASTM A 312 in 304/304L and 316/316L. We supply other stainless grades, including 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel grades are also supplied.

We supply a full range of pipe schedules ranging from Sch 5 thru Double Extra Heavy. Most products are available in 20′ random length sections, but SPEZILLA can supply stainless steel seamless pipe in most stainless grades in sections exceeding 40′. All stainless steel seamless pipes can be cut to your exact requirements. Some made to order items can be produced in 2-3 weeks.

Seamless Stainless Steel Pipe Grade Specifications

Stainless Steel Seamless Pipe Specifications
ASTM A312	This specification covers seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service.
ASTM A358	This specification includes electric-fusion-welded austenitic chromium-nickel stainless steel pipe.
ASTM A813	This specification covers two classes of fit-up and alignment quality straight-seam single- or double-welded austenitic steel pipe intended for high-temperature and general corrosive service.
ASTM A814	This specification covers two classes of flanged and cold-bending quality cold-worked straight-seam single or double welded austenitic steel pipe intended for high-temperature and general corrosive services.

Lengths: 17′ – 24′ Random Lengths

Nominal Wall Thickness:

Nominal Wall Tolerance Plus 12.5%, Minus 12.5%
These do not conform to the American National Standard for Welded and Seamless Wrought Steel Pipe
(ANSI B 36.10 – 1979)

NPS Designator	Outside Diameter in.	Schedule 10S in.	Schedule 40S in.	Schedule 80S in.	Schedule 160 in.	Schedule XX in.
1/4	0.540	0.065	0.088	0.119
3/8	0.675	0.065	0.091	0.126
1/2	0.840	0.083	0.109	0.147	.188	.294
3/4	1.050	0.083	0.113	0.154	.218	.308
1.0	1.315	0.109	0.133	0.179	.250	.358
1 1/4	1.660	0.109	0.140	0.191	.250	.382
1 1/2	1.900	0.109	0.145	0.200	.281	.400
2	2.375	0.109	0.154	0.218	.343	.436
2 1/2	2.875	0.120	0.203	0.276	.375	.552
3	3.500	0.120	0.216	0.300	.438	.600
3 1/2	4.000	0.120	0.226	0.318		.636
4	4.500	0.120	0.237	0.337	.534	.674
5	5.563	0.134	0.258	0.375	.625	.750
6	6.625	0.134	0.280	0.432	.719	.864
8	8.625	0.148	0.322	0.500	.906	.875
10	10.750	0.165	0.365	0.500	1.125
12	12.750	0.180	0.375	0.500	1.312
14	14.000	0.188	0.375	0.500	1.406
16	16.000	0.188	0.375	0.500	1.594

Minimum Wall Thickness on Inspection:

The following equation, upon which this table is based, may be applied to calculate minimum wall thicknesses from nominal wall thickness:
- tn * 0.875 = tm
  Where:
  tn = nominal wall thickness, in. [mm], and
  tm= minimum wall thicknesses, in. [mm]
- The wall thickness is inch-pound units is rounded to three decimal places in accordance with the rounding method of Practice E29. The wall thickness in SI units is rounded to one decimal place in accordance with the rounding method of Practice E29.
This table is a master table covering wall thicknesses available in the purchase of different classifications of pipe, but it is not meant to imply that all the walls listed herein are
necessarily obtainable for the applicable product specification.