Active Member
|
[China]
Address: Room 1514, Floor 4, No. 111, Fengpu Avenue, Fengpu Industrial Zone, Fengxian District, Shanghai, China
Contact name:camille
Shanghai Nadong Metal Products Co.,Ltd. |
|
|
Cold Rolled Hot Dipped Galvanized Steel Plate
Galvanized steel plate is divided into ordinary electrolytic plate
and fingerprint resistant electrolytic plate. Fingerprint resistant
plate adds a fingerprint resistant treatment on the basis of
ordinary electrolytic plate, which can resist sweat. It is
generally used on parts without any treatment, and the brand is
secc-n. Ordinary electrolytic board can be divided into phosphating
board and passivation board. Phosphating is commonly used. The
brand is secc-p, commonly known as P material. |
Specfications
Product | Galvanized sheet /coil |
Width | 600--1500mm |
Thickness | 0.12-5mm |
Length | 6-12m or According To Customer's Demends |
Zinc Coating | 30g/m2—275g/m2 |
Spangle | Big spangle, normal spangle, small spangle, non-spangle |
Surface Treatment | Chromate, Galvanized, Skin Pass, Passivity and Oiled(un-oiled) |
| Steel Grade | Dx51D, Dx52D, Dx53D, DX54D, S220GD, S250GD, S280GD, S350GD, S350GD, S550GD; SGCC, SGHC, SGCH, SGH340, SGH400, SGH440, or Customer’sRequirement |
Capacity | 15,000MT/Month |
Edge | Mill edge, cut edge |
| Delivery Time | within 15-20 days after receive 30% deposit or depend on Quantity |
| Payment Term | T/T, Irrevocable L/C at sight (30% deposit) |
| Trade Term | EXW, FOB, CFR, CIF |
Chemical Composition
| Specification | Grade | Chemical Composition(wt%) | ||||||
| C | Mn | Ni | Cr | Mo | Ti | |||
| ASTMJIS | 316L/022Cr17Ni12Mo2 | ≤0.03 | ≤2.0 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | - | |
| JIS | SUS316L | ≤0.03 | ≤2.0 | 12.0-15.0 | 16.0-18.0 | 2.0-3.0 | - | |
| ASTMJIS | 316Ti/SUS 316Ti | ≤0.08 | ≤2.0 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | 5*(C+N)-0.7 | |
Properties
| Spec | Grade | Mechanical Property | Physical Property | ||||
Y.S (N/MM2) | T.S (N/MM2) | EL (%) | HRB | Specific Heat (J/g℃) | Modulus of Elasticity (KN/mm2) | ||
| ASTM/GB | 316L/022Cr17Ni12Mo2 | ≥170 | ≥485 | ≥40 | ≤95 | 0.5 | 193 |
| JIS | SUS316L | ≥175 | ≥480 | ≥40 | ≤90 | 193 | |
| ASTM | 316Ti | ≥205 | ≥515 | ≥40 | ≤95 | 0.5 | 200 |
Applications:316L: Widely used in corrosion-susceptible environment and some mechanical components those are difficult to make heat treatment after forming in more corrosive environment.
316Ti: Mainly used for industrial components.
|
