AISI D3 Grade Alloy Steel Plate Good Wear Resistance Customized Dimension

Designation by Standards

Chemical Composition (in weight %)

Description
TMCN1 is Ni-Cr steel with added Mo and V and good thoughness and resistance to temperature changes.

Applications
Pilger mandrels up to diameter 140 -200 mm.

Physical properties (avarage values) at ambient temperature
Modulus of elasticity [10³ x N/mm²]: 210
Density [g/cm³]: 7.85

Soft Annealing
Heat to 620-680^oC, cool slowly.

Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to 600-650^oC, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.

Hardening
Harden from a temperature of 840-870^oC followed by oil or air quenching.

Tempering
Tempering temperature: 620-670^oC.

Forging
Hot forming temperature: 1050-850^oC.

Machinability
No data.

Forms manufactured: Please see the Dimensional Sales Program.

Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.