|
[China]
Trade Verify
Address: No. 289 Fangcheng Avenue, Xinwu District, Wuxi City, Jiangsu Province
Contact name:Supporter
Wuxi Jude Stainless Steel Co., Ltd |
|
Verified Suppliers
|
|
|
JISCO 430 Stainless Steel 2B Slit Rolled Strip
As a ferritic stainless steel, 430 stainless steel is categorized by its high chromium content. Ranging from 12-180, the increased levels of chromium create a grade of stainless steel that possesses good ductility and formability characteristics. It also has the ability to resist strong acid corrosion, and also because of the high chromium levels provides good resistance to oxidation.
The typical chemical composition is shown in the table below.
| Grade | Standard | 430 Chemical Composition | ||||||||
| C | Si | Mn | Cr | Ni | P | S | Mo | Others | ||
| ≤ % | ≤ % | % | % | % | ≤ % | ≤ % | ≤ % | % | ||
| 430 | ASTM A240 | 0.12 | 1.0 | 1.0 | 16.0 - 18.0 | 0.75 | 0.04 | 0.015 | — | — |
| 1.4016 | EN 10088-2 | 0.08 | 1.0 | 1.0 | 16.0 - 18.0 | — | 0.04 | 0.02 | — | — |
| SUS430 | JIS G 4304 | JIS G 4305 | 0.12 | 1.0 | 1.0 | 16.0 - 18.0 | — | 0.04 | 0.03 | — | — |
Mechanical Properties
The mechanical properties are given in the table below.
| Grade | Standard | 430 Mechanical Properties | |||||||
| Tensile Strength | Yield Strength Rp0.2 | Elongation >% | Hardness | ||||||
| (MPa) ≥ | (MPa) ≥ | HRB ≤ | HB ≤ | ||||||
| 430 | ASTM A240 | 450 | 205 | 22 | 89 | 183 | |||
| 1.4016 | EN 10088-2 | 400-630 | 240 | 18 | — | 200 | |||
| SUS430 | JIS G 4304 | JIS G 4305 | 420 | 205 | 22 | 88 | 183 | |||
| Finish | Thickness | Size | Characteristics | Applications |
| NO.2B | 0.3-6.0mm | Width: 1000/1219/1500mm; Length: any length | Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface | General Application Medical Instruments,Tableware |
| No. BA (Bright Annealed) | 0.3-6.0mm | Width: 1000/1219/1500mm; Length: any length | Bright heat treatment after cold rolling | Kitchen utensil, kitchen ware,architectural purpose |
| NO.4 satin #4 | 0.3-3.0mm | Width: 1000/1219/1500mm; Length: any length | Polishing with No. 150 to No.180 mesh abrasivesThe most popular finishes | Milk & Food processing acilities, Hospital Equipment, Bath-tub |
| NO.8 (8K mirror) | 0.3-6.0mm | Width: 1000/1219/1500mm; Length: any length | A mirror-like reflective surface by polishing with finer abrasives over 800 mesh | Reflector, Mirror, Interior-Exterior decoration forbuilding |
| HL (Hairline) | 0.3-6.0mm | Width: 1000/1219/1500mm; Length: any length | Finished by continuous linear polishing | Architectural purposes, escalators, kitchen ware vehicles |
Type 430 steel is a simple, inexpensive, and widely used stainless steel. While not a front runner in any one category, its combination of heat resistance, ductility, corrosion resistance, and low cost makes it a great general-purpose steel. Also, by modifying its composition slightly, 430F stainless steel can be easily machined, making a great machining alloy. Type 430 steel contests the top spot for the most widely used stainless steel, as it can be used in many applications such as:
and more.
To determine if this steel is right for your job, be sure to contact your supplier and ask them for their opinion. They will have the most up-to-date information on which steel will best fit your specifications and can give you the most relevant information on what is available.
JUDE is a leading supplier in the stainless steel industry. With excellent stainless steel coil inventory capability and advanced slitting equipment, we have become the dominant full-line processing service center for stainless steel strips in the China market. From incoming material inspection, cutting, slitting, surface treatment to packaging and delivery, we can do it all in-house. At the same time, we keep a large stock of stainless steel strips in thicknesses of 0.3mm-6.0mm to meet the immediate needs of our clients.
