HAINER STEEL INDUSTRIAL CO.,LIMITED |
|
Customized Cold Rolled 2mm 6mm Stainless Steel Sheet With 2B Surface
Description:
Thickness: 0.3-100 mm
Width: 1000/1219/1500/1800/2000mm (We can make special width according to customer's demand also)
Length: According to customers request
Material: 304, 304L, 316L, 321, 310S, 410, 410S, 420, 420J1, 430,
Surface finish: NO. 1, 2B, BA, NO. 4, HL, 8k mirror
Marking: Registered logo,Heat Number,Steel Grade,Standard,Size
Specification:
Item | stainless steel sheet(Hot rolled,cold rolled) |
Standard | ASTM A240,GB/T3280-2007,JIS4304-2005,ASTM A167,EN10088-2-2005,etc |
Material | 310S,310,309,309S,316,316L,316Ti,317,317L,321,321H,347,347H,304,304L, 302,301,201,202,403,405,409,409L,410,410S,420,430,631,904L,Duplex,etc |
Surface | 2B,2D,BA,NO.1,NO.4,NO.8,8K,mirror,checkered,embossed,hairline,sand blast,Brush,etching,etc |
Thickness | 0.3~200mm |
Width | 1000mm,1219mm,1500mm,1800mm,2000mm,2500mm,3000mm,3500mm,etc |
Length | 2000mm,2440mm,3000mm,5800mm,6000mm,etc |
Package | Standard export package,suit for all kinds of transport,or as required. |
Container Size | 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 40ft HC:12032mm(Lengh)x2352mm(Width)x2698mm(High) |
Definitions:
1. Plate,sheet,strip,and cold work as used in this specification apply to the following
2. plate-material 3/16 in.[5.00mm] and over in thickness and over 10 in.[250 mm] in width. Finished for plate are
actually shown in Section 13.
3. sheet-material under 3/16 in.[5.00mm] in thickness and 24 in.[600mm] and over in width. Finishes for sheet are
actually shown in Section 11.
4. strip-cold-rolled material under 3/16 in.[5.00mm] in thickness and under
24 in.[600 mm] in width, Finishes are detailed in Section 12 for strip and strip edges in
Section 14 for Cold-Rolled Strip
5.cold work-the changing of mechanical properties by work hardening
Applications:
We,this material stainless steel plates be widely used in kinds of industries:
THE CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES
Grade | C (Max) | Mn (Max) | P (Max) | S (Max) | Si (Max) | Cr | Ni | Mo |
201 | 0.15 | 5.50-7.50 | 0.06 | 0.03 | 1 | 16.00-18.00 | 3.50-5.50 | - |
202 | 0.15 | 7.50-10.00 | 0.06 | 0.03 | 1 | 17.00-19.00 | 4.00-6.00 | - |
301 | 0.15 | 2 | 0.045 | 0.03 | 1 | 16.00 - 18.00 | 6.00 - 8.00 | - |
304 | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.00 - 20.00 | 8.00- 10.50 | - |
304L | 0.03 | 2 | 0.045 | 0.03 | 1 | 18.00 - 20.00 | 8.00- 12.00 | - |
310S | 0.08 | 2 | 0.045 | 0.03 | 1.5 | 24.00- 26.00 | 19.00-22.00 | - |
316 | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.00 - 18.00 | 10.00- 14.00 | 2.00 - 3.00 |
316L | 0.03 | 2 | 0.045 | 0.03 | 1 | 16.00 - 18.00 | 10.00- 14.00 | 2.00 - 3.00 |
316Ti | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.00 - 18.00 | 10.00- 14.00 | 2.00 - 3.00 |
317 | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 18.00 - 20.00 | 11.00 - 14.00 | 3.00 - 4.00 |
317L | 0.03 | 2 | 0.045 | 0.03 | 0.75 | 18.00 - 20.00 | 11.00 - 15.00 | 3.00 - 4.00 |
321 | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 17.00 - 19.00 | 9.00 - 12.00 | - |
Finish Introduction
Surface Finish | Definition | Application |
2B | Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. | Medical equipment, Food industry, Construction material, Kitchen utensils. |
BA | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
NO.3 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. | Kitchen utensils, Building construction. |
NO.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment. |
HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building Construction. |
NO.1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical tank, pipe |
Grade | STS304 | STS 316 | STS430 | STS201 |
Elong(10%) | Above 40 | 30MIN | Above 22 | 50-60 |
Hardness | ≤200HV | ≤200HV | Below 200 | HRB100,HV 230 |
Cr(%) | 18-20 | 16-18 | 16-18 | 16-18 |
Ni(%) | 8-10 | 10-14 | ≤0.60% | 0.5-1.5 |
C(%) | ≤0.08 | ≤0.07 | ≤0.12% | ≤0.15 |