Copper Alloy Connection Utility Pressure Gauge 50mm 15 Kg/Cm2 Oil Manometer

2" 50mm 15 kg/cm2 Oil Manometer Center Back Copper Alloy Connection Utility Pressure Gauge

Description

The (relative) simplicity of pressure gauges derives from the fact that the pressure measured by the gauge is the only energy source necessary for the gauge to work. At the end of the production process, pressure gauges are calibrated according to the pressure readings of a “master” gauge that already exists. Once this is accomplished, the gauge is ready for use. Gauges are typically able to be installed at various points on a fluid power system (e.g. near a hydraulic pump’s pressure port, at a stand-alone regulator in a pneumatic or compressed air system, etc.). Sometimes, pressure gauges are even able to measure “sub-circuits” within a fluid power system that operate at different pressures than the rest of the overall system (e.g. a circuit that occurs after a reducing valve).

Applications

For gaseous and liquid media that are not highly viscous or crystallising and will not attack copper alloy parts.

Pneumatics

Heating and air-conditioning technology

Medical engineering

Special features

Reliable and cost-effective

Design per EN 837-1

Nominal size 40, 50, 63, 80, 100 and 160

Scale ranges up to 0 ... 400 bar

Dimensions

lower mount (radial)

back mount (axial)

Ordering information

Model / Dial size / Pressure Range / Process connection / Options