Mianyang Baoheng New Material Technology Co.,Ltd |
|
ASTM 304N Stainless Steel Round Bar UNS S30451 Round Bar DIN X5CrNiN 19-9 1.4315 Bar
Description
Our company provides ASTM 304N Stainless Steel Round Bar UNS S30451 Round Bar DIN X5CrNiN 19-9 1.4315 Bar ASTM A959-2004.
All of ASTM 304N Stainless Steel Round Bar UNS S30451 Round Bar DIN X5CrNiN 19-9 1.4315 Bar ASTM A959-2004 conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Products Details
ASTM 304N Hot rolled steel products Stainless Steel Hot rolled wire rods Round Bar UNS S30451 Forged DIN EN X5CrNiN 19-9/1.4315 Hot rolled round bars ASTM A959-2004
Chemical Composition (weight%): | Mechanical Properties Under Final Heat Treatment: |
C (%): ≤ 0.08 Si (%): ≤ 0.75 Mn (%): ≤ 2.00 P (%)≤: 0.045 S (%)≤: 0.030 Cr (%): 18.0 ~ 20.0 Ni (%): 8.00 ~ 11.0 Mo (%): - N (%): 0.10 ~ 0.16 | Condition: solution treatment Thickness/mm: 160max. Tensile strength, σb/MPa: 550 Yield strength, σ0.2≥/MPa: 240 Elongation, δ5≥(%): 30.0 Reduction of area, ψ≥(%): - Akv≥/J: - Hardness HBS: 217 |
ASTM 304N Hot rolled steel products Stainless Steel Hot rolled wire rods Round Bar UNS S30451 Forged DIN EN X5CrNiN 19-9/1.4315 Hot rolled round bars
Technical Standard | Equivalent Grade |
ASTM A959(2004) | 304N/S30451 |
BS EN 10088-2(2005) | X5CrNiN 19-9 |
NF EN 10088-2(2005) | X5CrNiN 19-9 |
DIN EN 10088-2(2005) | X5CrNiN 19-9/1.4315 |
KS D3706(2006) | STS 304N1 |
JIS G4303(2005) | SUS 304N1 |
ISO/TS 15510(2003) | X5CrNiN 18-8 |
ASTM 304N Hot rolled steel products Stainless Steel Hot rolled wire rods Round Bar UNS S30451 Forged DIN EN X5CrNiN 19-9/1.4315 Hot rolled round bars
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical composition of ASTM 304N Stainless Steel Round Bar UNS S30451 Round Bar DIN X5CrNiN 19-9 1.4315 Bar and test the finished products in strict accordance with the standards stipulated in the contract. In this process, the inner and outer surfaces, the appearance of both ends, bending, set length, outer diameter and Wall thickness will be checked one by one. You can rest assured that all products you receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time. Of course, after the start, we will have further
and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.