|
[China]
Trade Verify
Address: Room 501, Xuyuan Building, No. 5003 Longgang Road, Shenzhen, Guangdong, China 518000
Contact name:Kary Hou
GUANGDONG HWASHI TECHNOLOGY INC. |
|
Verified Suppliers
|
|
|
Robot arm model: HS-RH06, be able to lift 6kg of item. The motion radius is 1437mm which means the maximum reaching distance is 1437mm. Front and back distance could reach 1033mm. Six-axis movement.
| Name | HS-RH06 | ||
| Type | Standard Type | ||
| Structure | 6-axis, independent multiple articulation | ||
| Wrist Load | 6kg | ||
| Motion Range | Max Reaching Distance | 1437mm | |
| Min Reaching Distance | 404mm | ||
| Front and Back Motion Range | 1033mm | ||
Motion Speed | Arm | Rotation | 225°/S |
| Lifting Arm | 225°/S | ||
| Stretching | 225°/S | ||
| Wrist | Rotation | 425°/S | |
| Bending | 425°/S | ||
| Reverse | 629°/S | ||
| Repeated Positioning Accuracy | Within ±0.08mm | ||
| Servo Motor | Total Power | 3400W | |
| Brake Specs | All shaft-driven brake | ||
| Installation | Normal | ||
| Weight | About 170kg | ||
Panasonic 350 MIG Welder Technical Parameters
Model: YD-350GR3
Name: Japan Panasonic All Digital CO2/MAG Welder
Description:
Welding Material: Carbon Steel, Stainless Steel
1. All digital welder: digital power+digital wire feeder
2. Double CPU control, high speed high precision data treatment. Increase basic welding performance.
3. Good arc initiation performance
4. Wire feeder is equipped with digital motor with encoder. Achieve high precision wire filling.
5. Welding expert data base.
6. Increase strength of welding thin plate.
7. Suitable for multiple kinds of arc welding.
8. Equipped with stainless steel MIG welding mode.
9. Equipped with welding condition memory and fuzzy control function.
Digital communication and data management function.
| Model | YD-350 | |
| Control Mode | IGBT Inverter | |
| Rated Input Voltage Phase No. | AC380V three-phase | |
| Input Power Frequency | Hz | 50/60 |
| Input Capacity | KVA/KW | 14.5/14 |
| Output Current | A | 350 |
| Output Voltage | V | 31.5 |
| Rated Duty Cycle Rate | % | 60 |
| No Load Voltage | V | 70 |
| Output Current Range | A | 30-430(ohmic load output capacity)A |
| Output Voltage Range | V | 12-35.5(ohmic load output capacity)V |
| Initial Current Range | A | 30-430(ohmic load output capacity)A |
| Arc Ending Voltage Range | A | 12-35.5(ohmic load output capacity)V |
| Welding Mode | Individualize/centralize | |
| Arc Initiation Mode | High frequency arc initiation | |
| Shell Protection Grade | IP21S | |
| Insulation Grade | H | |
| Cooling Mode | Forced Air Cooled | |
| Suitable Welding Wire Type | Solid wire/ flux-cored wire | |
| Wire Diameter | Solid Wire 0.8/0.9/1.0/1.2mm Flux-cored wire carbon steel: 1.2 flux-cored wire stainless steel 0.9/1.2mm | |
| Wire Material | MS, MS-FCW( for 1.2mm only) SUS, SUS-FCW for MIG/MAG (for 1.2mm only) | |
| Storage | 9 channels for welding model storage | |
| Waveform control mode | Digital control: -7~7 | |
| Time sequence | welding,welding-arc ending,beginning-welding-arc ending,arc spot welding | |
| Protective gas | CO2 welding (CO2:100%) MAG weldiing (Ar: 80%+CO2:20%) MIG welding(Ar:98%+O2:2%) | |
| Gas checking time | S | Max 60s |
| Gas Pre-Filling Time | S | 0~5 continuous adjustment (0.1s progressive increase) |
| Gas Delay-End Time | S | 0~5 continuous adjustment (0.1s progressive increase) |
| Arc Spot Welding Time | S | 0~5 continuous adjustment (0.1s progressive increase) |
| Dimension | mm | 380×510×600mm |
| Welight | kg | 50 |
