|
[China]
Trade Verify
Address: Rm. E, 16th FL., Century Bldg. No. 206, Jianghan Rd., Hankou, Wuhan, China
Contact name:Kathy Wong
Wuhan Spico Machinery & Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
Multi Functional 750 GPM End Suction Fire Pump With Electric Motor Driven 155 PSI
The end suction centrifugal pump is a kind of centrifugal pump that has a casing with the suction
coming from one side and the discharge coming out the top. End suction pumps are almost entirely
single stage pumps, meaning they only have one impeller.
It is also the most common layout for centrifugal pumps and the
least expensive design in most instances.
A wide variety of sizes, designs and materials of construction are on offer by various manufacturers for
various applications ranging from water at ambient temperatures to high temperature and high pressure
viscous oils, corrosive chemicals, and abrasive slurries.
Main Configuration:
| Rated Flow | 750 GPM / 2980 rpm |
| Rated Head | 155 PSI |
| Pump : NM Fire (UL/FM ) | ESF 80/26 |
| Casing | Ductile Cast Iron |
| Impeller | Bronze |
| Shaft | SS420 |
| Seal | Gland Packing |
| Wear Ring | Bronze |
| Bearing | SKF |
| Motor: Techtop (UL) | TDC365TS100U2B / 100HP |
| Control Panel: Tornatech (UL/FM) | GPY series |
The end suction centrifugal pump normally contains a single impeller and a spiral like casing. The fluid that
is being pumped moves along the impeller’s vanes, which increases the fluid’s velocity. From there the fluid
is moved into the spiral like casing, where the high velocity is transformed into high pressure by a diffusion
process.
UL:
| Q: 100-750GPM | H:100-145PSI |
FM:
| Q: 100-750GPM | H:100-145PSI |
CCCF:
| Q:5-150L/S | H:0.40-1.6Mpa |
CNP NMFIRE End suction fire pump is the perfect solution for small capacity fire applications. Back pull-out design
end suction fire pump, allows the complete rotating element to be removed for servicing without disconnecting pipe
work. If a spacer coupling is fitted then driver does not have to be moved too. Simplicity of design ensures long efficient
unit life, reduced maintenance costs and minimum power consumption.
