Home Companies Wuhan Spico Machinery & Electronics Co., Ltd.

1500GPM Horizontal Split Case Double Suction Centrifugal Pump With Single Stage

Contact Us

[China]

Trade Verify

Address: Rm. E, 16th FL., Century Bldg. No. 206, Jianghan Rd., Hankou, Wuhan, China

Contact name:Kathy Wong

Wuhan Spico Machinery & Electronics Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

1500GPM Horizontal Split Case Double Suction Centrifugal Pump With Single Stage

Country/Region	china
City & Province	wuhan hubei
Categories	Pumps

Product Details

1500GPM Horizontal Split Case Double Suction Centrifugal Pump With Single Stage

There are two main types of the split case pump. When the casing is split along a vertical plane with respect to the impeller, it is referred to as a vertical split case pump. When the casing is split along a horizontal plane, it is referred to as a horizontal split case pump. The later type of casing design is more economical in applications that require significantly higher flows, and its impeller can be supported using bearings on two sides, which is an advantage for larger, higher flow pumps.
The split case pump has both the discharge and suction connections in the lower half of the pump casing, in an opposing configuration to each other. The pump’s impeller is normally mounted on a shaft that is supported by bearings on two sides.

Parameters:

HEAD			PUMP MODEL	SPEED	MAX SHAFT POWER
PSI	FEET	METER	PUMP MODEL	RPM	HP	KW
115	265	81	SCF200-150-460 (8X6")	1800 (60Hz)	231	172.1

KEY FEATURES

Single stage, medium pressure double inlet centrifugal pump with two flanged bearing frame, suitable for flexible coupling to electric motor or internal combustion engine as a driver;
Ample dimensioned shaft guided through roller bearings and hardened shaft sleeve;
Fully-enclosed single piece casting, double inlet impeller practically doesn’t produce any axial trust;
High operating reliability due to maintenance and service parts;
Spiral housing axially spitted means easy maintenance without pipe disconnection.

Performance Ranges:

UL:	Q: 500-4000GPM	H:100-190PSI
FM:	Q: 500-4000GPM	H:100-190PSI
CCCF:	Q:20-500L/S	H:0.42-2.0Mpa
NFPA20:	Q: 300-8000GPM	H:60-300PSI

Application:

For liquid transfer and circulation of cold clean or slightly polluted water. Typical applications in:

Municipal water supply;
Power plants;
Industrial plants;
Boiler feed and condensate systems;
Irrigation and dewatering;
General purposes.

Advantage:

First-Class international technical standards

Horizontal Split Case (HSC) pumps are given their name due to the “split”” design of the casing, where the casing cover can be lifted off of the pump to expose the internal components. These components include the impeller, bearings, pump shaft, and so on. HSC pumps have two bearings, located on either side of the impeller, which are useful to withstand the large amount of vibration and thrust forces often caused

by water turbulence in the suction piping. The pump casings are often designed to handle higher working pressures, and are often heavier. The durability of the HSC design allows the pump to be used for very large water flows – often in excess of 5000 GPM. It should be noted that an HSC pump is not always mounted horizontally, it is possible to have the same durability design features and have the pump designed to be mounted vertically.