Active Member
|
[China]
Address: Xianhou County No. 368, Quan Yutong business Center 5F 501, Huli , Xiamen, China.
Contact name:Mark
Xiamen Spider Science and Technology Co., Ltd |
|
|
High Power 9000 BTU Split Air Conditioner For Home / School Use
9000 BTU Split Air Conditioner Features:
Big LCD display
Ultra-quiet design
24-hour timer
LCD remote controller
Fault self-diagnosis function
Efficient energy saving
Ultra-strong EMC
Sleeping mode function
Independent dehumidification (Dry mode)
Constant fan speed control
360-D blowing
PG motor
CE CB TUV GS approvaled
Double-muting technology
Auto-defrost function
With 3m connection copper pipe and 4m electrical cables
Auto-restart function
Galvanized outdoor casing with anti-rust layer
9000 BTU Split Air Conditioner Parameters
Name | DC Inverter 9000 BTU Split Air Conditioner With Screw Rotary Type Compressor | |||
Class in Cooling |
| A | ||
Class in Heatling |
| A | ||
Control type |
| Remote Control | ||
Performance | Cooling Capacity | Btu/h | 9000(3410~11500) | |
Heating Capacity | Btu/h | 10000(5120~12700) | ||
EER | W/W | 3.22 | ||
COP | W/W | 3.28 | ||
Noise Level | Indoor(Hi/Med/Lo) | dB(A) | 36 | |
Outdoor | dB(A) | 51 | ||
Pressure | High(DP) | MPa | 4.5 | |
Low(SP) | MPa | 1.9 | ||
Moisture Removal | L/h | 0.6 | ||
Electrica Data | Voltage,Frequency,Phase | V~,Hz,Ph | 220V-50HZ | |
Rated Power Input | Cooling | W | 820(220~1200) | |
Heating | W | 890(370~1400) | ||
Rated Current | Cooling | A | 3.7(1.3~5.5) | |
Heating | A | 4.0(1.5~6.5) | ||
Max. Input Consumption | Cooling | W | 1200 | |
Heating | W | 1500 | ||
Max. Current | Cooling | A | 5.5 | |
Heating | A | 6.5 | ||
Aunual energy consumption | kwh | 410 | ||
Refrigerating System | Refrigerant | R410A/520g | ||
Compressor | Type | ROTARY | ||
MFG | RECHI | |||
Fan System | Indoor air circulation Cooling/heating | m3/h | 430/430 | |
Indoor fan type | Cross Flow | |||
Indoor fan speed H/M/L | Cooling | rpm | 1250/1150/900 | |
Heating | rpm | 1250/1150/900 | ||
Dry | rpm | 900 | ||
Sleep | rpm | 900 | ||
Indoor fan motor output | W | 15 | ||
Outdoor fan type |
| Propeller fan | ||
Outdoor fan speed | rpm | 900 | ||
Outdoor fan motor output | W | 31 | ||
Package System | Net Dimension | Indoor(WxHxD) | mm | 718×240×180 |
Outdoor(WxHxD) | mm | 700×256×552 | ||
Net Weight | Indoor | kg | 7 | |
Outdoor | kg | 28 | ||
Packing Dimension | Indoor(WxHxD) | mm | 805×305×255 | |
Outdoor(WxHxD)(Without Pipe) | mm | 803×325×600 | ||
Outdoor(WxHxD)(With Pipe) | mm | 803×361×600 | ||
Gross Weight | Indoor | kg | 9 | |
Outdoor (Without Pipe) | kg | 31 | ||
Outdoor (With Pipe) |
| 32 | ||
9000 BTU Split Air Conditioner Details
Compressor
Copper tube
Original: China
Due to the increased internal surface area of the internally
threaded copper tube, its thermal conductivity is 20 to 30 percent
higher than that of the optical tube.
Heat Exchanger
Original: China
The double-row heat exchanger indirectly increases the heat
exchange area of the copper tube, and the heat exchange is more
effective and thorough, which can save energy and increase the
working efficiency of the machine.
Connecting pipe
Original: China
The design of the copper tube in the heat exchanger is two-in and
two-out, and the refrigerant enters and exits at a high speed,
which effectively increases the heat exchange efficiency of the
refrigerant.
FAQ
1. Are you a factory or a trading company?
We are a trading company. The factories we work with are built for
a long time, and after a long period of cooperation, we can
guarantee the quality of the products and provide efficient
services. We have already checked the factory for you, you only
need to ask for it, we will help you to meet the requirements.
2. Why are your products so expensive?
Good things are not necessarily expensive, but expensive things
must be good. The minimum configuration of our products: double-row
condenser, new GMCC compressor, internal thread cooling copper
tube, anti-corrosion hydrophilic aluminum foil. This configuration
can get this price is already very cheap. If you replace it with a
single-row condenser, refurbish the compressor, and smooth the
copper tube, then the finished product is definitely much lower,
but we don't provide three-pack service for such products.
3. Can you provide customized services?
We only provide OEM services. We can provide the corresponding
modification according to your needs for the product. If only the
product log and carton are changed, it will not affect the
production cycle. If you need to change the shape or parts of the
product, it takes about 15 days of development.
4. Can I be your only product agent?
Of course, but we have no general agent in the local area. If we
already have a general agent in the local area, then you cannot be
our agent. You can get the products at our agents. Of course, you
can get the products from our company, but we will notify our
agents of this.
5. Can I request samples for free?
If you need a deeply customized product, we need a development
cycle of about 15 days, and the sample delivery time will be
longer. If you only need samples of regular products, we need you
to bear the cost of the product and shipping costs, if you have an
order, you will be refunded 1.5 times the cost of your sample.
6. How do you guarantee the quality of the factory products?
We have passed the certification of Gold supplier Enterprise of
Alibaba International Station, passed the strict certification
assessment of the certification company, and the relevant
identification report can be downloaded and viewed in our store. I
can also provide you with the certificate.
