Oil Pressure Sensor Switch 185246290 For Perkins 403C-15 404C-22 Excavator Pressure Sensor

Oil Pressure Sensor Switch 185246290 For Perkins 403C-15 404C-22 Excavator Pressure Sensor

Specifiion

Description

The oil pressure sensor is an important device for detecting the oil pressure of the engine, and the detected data can help control the normal operation of the engine. The oil pressure sensor is installed on the main oil passage of the engine. When the engine is running, the pressure measuring device detects the pressure of the oil, converts the pressure signal into an electrical signal and sends it to the signal processing circuit. After voltage amplifiion and current amplifiion, the amplified signal is amplified by the signal line. The pressure signal is connected to the oil pressure indior, and the ratio of the currents passing through the 2 coils inside the oil pressure indior is changed to indie the engine oil pressure. The pressure signal after voltage amplifiion and current amplifiion is also compared with the alarm voltage set in the alarm circuit. When the voltage is lower than the alarm voltage, the alarm circuit outputs an alarm signal and lights the alarm light through the alarm line.

The wiring method of the electronic oil pressure sensor is exactly the same as that of the traditional mechanical sensor. It can replace the mechanical pressure sensor and directly connect with the automobile oil pressure indior and the low pressure warning light to indie the oil pressure of the diesel engine engine and provide a low pressure warning signal. Compared with the traditional piezoresistive oil pressure sensor, the electronic automobile oil pressure sensor has the advantages of no mechanical moving parts (ie no contact), high precision, high reliability, long life, etc., and meets the requirements of the development of automobile electronics. .

Due to the harsh working environment of the automobile, the requirements for the sensor are very strict. In the design of the electronic automobile oil pressure sensor, it is not only necessary to select a pressure measuring device with high temperature resistance, corrosion resistance and high precision, but also a reliable performance and wide operating temperature range. components, but also need to take anti-interference measures in the circuit to improve the reliability of the sensor.

Characteristic
 

1.light weight
2.reliable operation,
3.simple structure
4.high signal to noise ratio
5.high sensitivity and wide signal bandwidth

More products