Guangzhou Chuangya Acoustic Technology Co., Ltd. |
Verified Suppliers
|
|
Acoustic Wooden Slat Wall Panels Fire Resistant Sound Absorb Material
Product Parameters
Product Name | Fire Resistant Sound Absorb Material |
Pattern | MDF 27mm, Edge to edge 13mm / customized |
Standard Size | 2400*600*21mm / customized |
MDF Thickness | 12mm/15mm/18mm |
Polyester Thickness | 9mm/12mm |
Finish | Melamine / Veneer / Painting |
Material | Basic: Engineered Veneer+MDF +Felt made of recycled plastic
Bottleshe Surface: Fireproof finished / Wood Finished / Melamine Finished |
Bottom | PET polyester panel |
Test | Eco protection, Sound absorption, Fire-retardant |
Function | Sound absorption / Interior decoration |
Noise Reduction Coefficient | 0.85~0.94,SGS Test for polyester panel |
Product Features:
1. With excellent sound absorbing performance. The NRC can be 0.85
to 0.94.
2. Easy to cut by knife and easy to install by glue or nail.
3. Good physical stability, will not inflate or shrink due to the
change of temperature.
4. Soft and natural texture. It will not get broken under huge
impact of high elasticity.
5. Easy dust removal and easy maintenance by vacuum cleaner or
feather dust.
PRODUCT USE SCENARIO
Ensure clear language and reduce echoes in gymnasiums, badminton halls, tennis courts, etc.
Reduce echo to increase speech and music clarity in theaters, cinemas, concert halls, churches, etc.
Inprove indoor environmental quality and comfort in museums, hospitals, rail station, airport, etc.
Improve speech intelligibility in classroom, function room.
Acoustic treatment to meet the design of offices, hotels, banquet halls, restaurants, etc.
Product Installation
Panels can be mounted with very few tools - the panel is mounted on
5 horizontal bars with black screws. You will find E0 hot
glue,spray glue or gun nail to install on the wall. Here,the
underlying walls are painted white on top and black on bottom.
Extra attention was paid to detail and the edges of the doors and
Windows were decorated with elegant oak lines. Since the panels are
mounted on the joists/wooden beams, they can be removed again. This
makes them suitable for rental homes that would otherwise not be
able to be painted, wallpapered or similar variations.
1. Install 45mm (thickness) battens directly to your wall/ceiling
with a distance of 600mm.
2. Install the acoustic panels directly on the battens with screws
(min. 3.5mm × 35mm). You can easily fit the screws between the
lamellas into the underlying acoustic felt. Every panel is
installed with 15 screws.
3. Cutting the panels is easily done with a fine jagged saw. The
underlying acoustic felt is easily cut with a good knife.
4. For an expanded acoustic solution, you can place 45mm insulation
between the studs.