Active Member
|
[China]
Address: 2F, Building 8, YuanLing Industrial Park, ShangWu Community, ShiYan Street, Bao'an District, Shenzhen，China
Contact name:Sandy Wang
Shenzhen DeKang Electronic Cleaning Appliances Co.,LTD |
|
|
Ultrasonic application:
The use of industrial ultrasonic cleaner for routine injection mold maintenance has been effectively employed for many years. It provides a number of benefits not achievable using more traditional methods. As it is a non-contact process, mold detail is not damaged during cleaning. Critical tolerances can be preserved, thereby extending mold life.
The higher levels of cleanliness attained using ultrasonic cleaning also results in better releases and longer runs while improving productivity and minimizing scrap.
The penetrating nature of ultrasonic cleaning minimizes the requirement for mold dis-assembly and removes residual polymer and releases from mechanically active mold components thus extending their life. It can also remove buildups from internal cooling ports and channels, thereby improving polymer flows.
The use of mould and die cleaning system developed by us is a high-tech, low-labour method for cleaning injection moulds and dies. The ultrasonic cleaning removes carbonization, mould release, gassing, flashing, and other residues from moulds and dies in as little as 15-20 minutes.
Some of the highlighting features of mould and die cleaning system are:
1. Reduce maintenance down time
2. Eliminate hand cleaning
3. Replace troublesome solvents and harsh abrasives that can damage moulds
4. Improve cleaning effectiveness as chemistry and ultrasonic gently clean
5. Even intricate designs and patterns
6. Decrease labour expenses.
Specification
| Model: | DK-1030W |
| Tank Size(mm): | 550*450*400 |
| Overall Size(mm): | 820*580*900 |
| Capacity: | 88L |
| Frequency(KHz): | 28/40 |
| Ultrasonic Power(W): | 0~900 |
| Heating Capacity(W): | 3000 |
| Timing Range(min:secs): | 1~99 |
| Temperature Range(℃) | 0~80 |
| Water Drainage | Yes |
