Active Member
|
[China]
Address: A238,Qixing Business Center, No.15, Wangyuan Road, Huangcun, Tianhe District, Guangzho, China
Contact name:Vivi
Guangzhou Caizhiheng Equipment Co., Ltd |
|
|
High Speed Solvent Sticker Banner Printing Equipment Flatbed Large Format Challenger 3276E
Printhead Specifications
1. High Precision Speed
2. High quality
3. Leading Technology
4. Easy control &maintain
5. Seiko SPT510-50PL Printhead
6. Pheaton Digital outdoor inkjet printer with max printing width
3.2m(10.5ft),
7. Digital Eco-Solvent Printer E Series UD-3276E ,
8. With 6pcs Seiko SPT510-50PL Printheads, Large Format Printer ;
9. Full aluminum platform / Individual positive pressure cleaning
10. X, Y axis AC servo motors / Bearing rail, stable and long
durability
| MODEL | UD-3276Q | |
|---|---|---|
| Printhead SII Printek Inc. | SPT510-50PL | |
| Number of printhead | 6 Heads | |
| Maximum print width | 3,200mm | |
| Print Speed (m2/h) | Print mode | Standard output(m2/h) |
| D | 2 PASS 85 | |
| S | 3 PASS 57 | |
| Q | 4 PASS 38 | |
| HQ | 4 PASS 32 | |
| C | 6 PASS 26 | |
| Ink | Type: | Solvent Ink / ECO Solvent Ink |
| Color : | 6 Color (C,M,Y,K,Lc,Lm) | |
| Capacity: | 1L or 5L per Main Tank of Each Color | |
| Ink Supply System | Low Ink Dectector, Auto or Manual Ink Supply System | |
| Media Width | Maximum 3,300mm | |
| MODEL | UD-3276Q |
|---|---|
| Media Type | Vinyl, Window Film, Polyester, Flex, Back-lit Film, etc. |
| Auto Media Feeding System | Equipped (Max. Media Weight 80kg) |
| Auto Cleaning System | Individual Positive Pressure Cleaning Anti-clogged Flash Function & Capping System |
| Pre-heating & Drying System | Equipped |
| Clamp | Equipped |
| Print Interface | USB 2.0 |
| Printhead Height | 2 to 6 mm from Media |
| RIP Software | Maintop, Ultraprint, Photoprint, Wasatch, Topaz |
| Input Power | AC 220V, 50Hz/60Hz |
| Machine Dimension / N.W | L4,500 x W905 x H1,260mm / 362KG |
| Package Dimension / G.W | L4,650 x W970 x H1,550mm / 582KG |
Situations
1. The ink in the photo machine heads accumulated to a certain
extent out of the orifice is clogged: is the most common way to
plug because the ink solvent must evaporate into the air in order
to make the picture becomes dry, so the ink is a volatile liquid in
the air and clarity of volatile solids. When the spray orifice
cloth inkjet, always leaving a part around the ink, this part of
the ink after drying in air injection holes will slowly become
smaller even close off the spray orifice, but because it is outside
the nozzle hole, it is easy clean, and this is the reason why we
often wash nozzle.
2. Piezoelectric crystal damage: Definitely not the ink jet
nozzle, the general use of piezoelectric nozzle about a year, a lot
of effort in printing plants may also use less than a year is
normal.
3. The piezoelectric crystal fatigue damage: the phenomenon is
sometimes inkjet photo machine heads, and sometimes not spray ink,
especially when large-jet (ie when the spray dark picture) "jam"
phenomenon obviously, at this time the best way is replaced with a
new nozzle.
4. Filter blockage caused no ink within the nozzle nozzle:
nozzle used longer, especially in the printing task without full
shutdown of the plant often at night, the ink does not flow in the
nozzle in a longer time, is easily adsorbed in the interior of the
filter network or walls of the ink channel, so that the
cross-sectional area of the ink flow becomes small nozzles can also
cause no ink phenomenon.
5. The viscosity of the ink is too high or too low: too high
viscosity of the ink the fluidity of the ink is poor, the amount of
ink per unit time sprayhead enough; viscosity of the ink is too
low, that is too thin, easily pressed against the nozzle orifice
Withdrawing transistor when inhaled air can not absorb ink, which
is emitted by air; both of which cause no ink nozzle phenomenon.
This often requires the customer is located ink environment is
important, the case of using the ink should be placed in front of
the environment using the ink more than 24 hours as well, because
the ink is placed at low temperature viscosity will be high, while
the viscosity at a high temperature will becomes low, the viscosity
varies widely, once a large mixed use ink viscosity differences, it
will cause no ink jet phenomenon
Product Display
