BALLNOSE Tungsten Solid Carbide Mill HRC55 2F Nano Copper Coated

Tungsten Solid Carbide Mill HRC55 2F BALLNOSE Nano Copper Coated Ball Nose End Mill Tungsten Carbide End Mill

FLAT SOLID CARBIDE END MILL Choose good solid carbide, good quality with cost-effective

GOOD WEAR RESISTANCE, LONG WORKING LIFE, NANO COATING

Made with Anka machine tools andGermantechnologyit can perform finishing and semi-finishing on heat-treated materials below 66 degrees.enhance tool life reduce the number of roundaboutsandprovide machine tool operation.

BIG DIAMETER DESIGN, SHARP CHIP REMOVAL

The unique helix angle is ground by first-class precision machine tools.The large core diameter design enhances rigidityandshock resistanceThe large chipremoval spaceis not easyto accumulate chips,and is not easy to break. It is sharp and wear-resistantcutting smoothly,and improvingmilling efficiency

WITH PASSIVATION TREATMENT DURABLE AND ANTI-CORROSION

Imported passivation equipmentfinely densified sand. increases the corrosion resistance and wear resistance of the end mill. Good grinding makes the cutting edge without chips. It can Extended the working life.

SPECIFICATION SHEET

HRC662FlutesBallnoseSolid carbide end mils

Materials Solid Carbide

Brand GREWIN

Coating Nano purple coating

Flute 2 flutes PEWIN

Hardness HRC66

Spiral Angle 35°

45#steel,cast lron,tool steel and mould steel

Materials to be cut within HRC66

Machine to be used CNCmachining centers,engraving machines

and other high-speedCNC milling machines

A SOLID CARBIDE END MILL WHO UNDERSTAND WHAT YOU WANT

Real end mill photo, you will get what you read from the picture

WIDE RANGE OF CUTTING MATERIALS

Materials to be cut:45# steelcast lrontool steel and mould steel within HRC66

WARMLY TIPS

01 trial life of the milling cutter. Properly reducing the cutting speed and feed rate can prolong the

02 cutting edge, which makes the cutting smoother. When working, it is necessary to add cutting fluid to protect the

03 When there is an oxide film or other hardened layer remaining on the surface of the workpiece, it can be removed by reversible milling

INSTRUCTIONS FOR USE

What buyers need to know aboutend mill selection and operating instructions

01.

Before using the tool,please measure the tool deflection.lf the tool deflection accuracyexceeds0.01mm,please correct it before cutting.

02.

The shorter the length of the end mill sticking out of the chuck,the better.

If the end mill sticks out for a long time,it is necessary to reduce the rotational speed,feed rate or cutting amount.

03. TCREWIN

During cutting,if abnormal vibration or sound occurs,please reduce the cutting speed and the cutting feedrate until the situation improves.

04.

The steel cooling is preferably spray and air jetwhich can effectively improve the use effect of the milling cutter.

WITH PASSIVATION TREATMENT DURABLE AND ANTI-CORROSION

Imported passivation equipment, finely densified sand,increases the corrosion resistance and wear resistance of the end mill. Good grinding makes the cutting edge without chips. lt can Extended the working life.

1. Products Description
Micro grain raw material
Grain size: 0.4-0.6μm
Co 10%, 12%
TRS >3600 N/mm2
Hardness HRA 91.8-92.5
Work piece HRC45-50 HRC55-60 HRC65 HRC68
Helix angle 30°-45 °
Diameter of cutting edge 0.2-0.9 mm; 1-20 mm
Diameter of rods 4-20 mm
Length 50-100 mm
Cutting Form Flat, Square, Ball nose, Corner Radius, Taper Flute, etc
Flutes No. 2/4

Suitable for machine: CNC Grindng Center, Engraving Machine, high speed machine, ECT.,
materials to be cut: carbon steel, high speed steel, stainess steel, requeched steel and other difficulty matarials.
faetures:
The sharp and positive rake angles are sharpened and sharpened. The 4-blade geometry cutting design has a large capacity for chip removal. It is a smoother cutting, non-stick knife, and achieves efficient machining.

Specification:

Our Services
More than 2000 products are available. Assembly line production, high standard and strict requirements.
OEM Services Offered
Customized Tools Offered
Free laser marking on tools and boxes Offered
Fast delivery time and Convenient Transportations. We have discount on shipping cost from our courier companies, such as FedEx, DHL, TNT, UPS etc.