YT-1000L Korea YTC Electro Pneumatic Positioner Linear type valve
Actuators
The Electro-Pneumatic Positioner YT-1000R is used for operating of
pneuamtic rotary valve actuators by means of electrical controller
or control system with an analog output signal of DC4-20 mA or
split ranges.
The Electro-Pneumatic Positioner YT-1000L is used for operation of
pneumatic rotary valve actuators by means of electrical controller
or control system with an analog output signal of DC 4 to 20mA or
split ranges.
- Simple zero and span adjustment
- No resonance between 5-200Hz
- Auto/Manual switch
- RA v.s. DA action and 1/2 split range setting by simple adjustment.
- Internal feedback signal is available as an option (weather proof
only)
Features:
1. The product is made of stainless steel and can be used in
corrosive environment or sea environment.
2. Positive and reactive, single and double effects can be easily
converted between.
3. The vibration generated by the small actuator can be solved by
adding the orifice of the positioner.
4. Air consumption is small, good economy.
5. No need to replace the parts can be achieved within the scope of
1/2 split control.
Specifications
| Item. Type | Single | Double |
| Input Signal | 4-20 mA DC |
| Impedance | 250±15 Ω |
| Supply Pressure | 0.14~0.7 Mpa |
| Stroke | 0~90° |
| Air Connedtion | PT(NPT) 1/4 |
| Gauge Connection | PT(NPT) 1/8 |
| Conduit | G(PF, NPT)1/2, M20 |
| Explosion | Exdmb ⅡB T5 (KTL)
Exdmb ⅡC T5 (KTL)
Exdmb ⅡB T6 (KTL)
Exdmb ⅡC T6 (NEPSI)
Exdmb ⅡC T5/T6 (NEPSI) |
| Enclosure | IP66 |
| Ambient Temp. | Operating | -20~70 ℃ |
| Explosion | -20~60 ℃ |
| Linearity | ±1% F.S. | ±2% F.S. |
| Hysteresis | ±1% F.S. |
| Sensitivity | ±0.2% F.S. | ±0.5% F.S. |
| Repeatability | ±0.5% F.S. |
| Air Consumption | 2.5LPM (sup=0.14 MPa) |
| Flow Capacity | 80LPM (sup=0.14 MPa) |
| Material | Aluminium Diecasting |
| Weight | 2.8 kg |
Our Service
One year quality guarantee Policy
We will check the goods quality before shipment. If there are some
unexpected problems
happen, we hope to solve the problems with buyer through friendly
in the following ways:
1, If it is quality problem, buyer can submit argue within 15days
after receiving the goods,
buyer must provide photos or video and other evidence to seller for
identify.
2, Man-made damaged, buyers take full responsibility.
3, Product quality processing program:
1) The buyer return the products for bad quality reasons for one
year (not included those
damages coursed by shipping or Man-made damaged ). A 15% restocking
fee is
assessed for any products returned in "used" condition. And then we
will send a new
product to buyer and pay for the resend shipping cost.
2) If the goods (total price including shipping is less than 10USD)
has quality problems, we
will resend a new product in buyer next order; if buyer don’t plan
to make a new order in
the near term, buyer can pay the resend shipping cost and ask to
resend a new product. If
there is an issue with the products, please contact us– we will
solve it as soon as we get
your email.
