Active Member
|
[China]
Address: ZHONGXING EAST ROAD 208, XIKOU TOWN315502, FENGHUA CITY, ZHEJIANG PROVINCE, CHINA
Contact name:Ricky
Ningbo Nijia Electronics Technology Co.,Ltd |
|
|
ASCO SCG353A051 integral dual stage 2 1/2 " 110 V AC diaphragm pulse jet valve
FEATURES:
1. The pulse diaphragm pulse valves 3" Embeded type are especially designed for dust collector service
applications,
combining high flow, long life and extremely fast
opening and closing to provide reliable and economical operation
2. The high flow, angle type bodies in combination with the special
main diaphragm
assemblies give the unique operating features required
for dust collector service applications
3. The design with integral compression fittings will facilitate
installation because there is no need for
threaded piping
4. The high quality diaphragms are reinforced and wear resistant to
guarantee a long operating life,
even under harsh conditions
Construction:
| Body | Aluminum |
| Core tube | Stainless steel |
| Core and Plugnut | Stainless steel |
| Core Spring | Stainless steel |
| Sealing & disc | CR (chloroprene) |
| Diaphragm | NBR(nitrile/buna-n) or Viton |
| Shading coil | Copper |
| Connector | DIN43650A |
| Voltage | DC: 24V, AC: 24V,48V,110V,230V |
| Working Temperature | - 20 to + 85 ℃ |
| Protection Class | IP65 |
| Coil Insulation Class | F |
| Working Pressure | 0.35-0.85Mpa |
OPTIONS:
| 1 | Waterproof enclosure with embedded screw terminal coil according to protection class IP67, CEE 10 |
| 2 | Explosionproof solenoids for hazardous locations according to “ATEX” (CENELEC) and national standards |
| 3 | Explosionproof and watertight solenoids according to “NEMA” standards |
| 4 | Hose connection executions (3" only) |
| 5 | Compliance with “UL” standards |
| 6 | Plug with visual indication and/or peak voltage suppression |
| 7 | Electronic timer |
| 8 | Valves can also be supplied with FPM (fluorelastomer) diaphragms and seals. Use the appropriate suffix letter for identification |
INSTAllATION:
| 1 | Prepare supply and blowtube pipes to suit valve specification. Avoid installing valves underneath the tank. |
| 2 | Ensure tank and pipes are free from dirt, rust or other particulate. Ensure supply air is clean and dry. |
| 3 | Mount valves to inlet pipes and blow tube to valves, ensuring no excess thread sealant can enter the valve itself. |
| 4 | Apply moderate pressure to system and check for installation leaks. Fully pressurise system. |
| 5 | Test fire and listen for proper actuation and crisp pulse noise. |
| 6 | The valves can be mounted in any position without affecting operation,Threaded pipe connection is: G = G (ISO 228/1) or compression fittings |
| 7 | Other pipe threads are available on request, Installation/maintenance instructions are included with each valve, Spare parts kit and replacement coils are available |
DIMENSIONS (mm), WEIGHT (kg):
| Ordering Code | A | B | C | D | E | F | G | H | J | K | L | Weight |
| SCG353A047 | 80 | 50 | 30 | 71 | 130 | 136 | 45 | G 3/8 " | 131 | 160 | 178 | 1.4 |
| SCG353A050 | 80 | 50 | 30 | 95 | 168 | 165 | 45 | G 3/8 " | 165 | 210 | 227 | 2.9 |
| SCG353A051 | 80 | 50 | 30 | 95 | 168 | 165 | 45 | G 3/8 " | 165 | 210 | 227 | 2.6 |
| SCG353.060 | 80 | 50 | 30 | 143 | 240 | 192 | 45 | G 1/2 " | 165 | 258 | 275 | 4.1 |
