Changzhou Hangtuo Mechanical Co., Ltd |
Verified Suppliers
|
|
Single Axis Small Size Vertical Slewing Drive For Concentrated Solar Trackers
Vertical Slewing Drive Description
The housing of the slewing drive is a cast part and can be
dimensioned according to customer requirements. The closed housing
protects the slewing drive from contamination, damage and
grease leakage, ensuring smoother operation and longer life of the
slewing drive.
Additionally, the seals mounted on the housing structure protect
the interior of the assembly from contamination if the
slewing drive is used in wet or dirty environments. Because
the performance and reliability of the slewing drive depends to a
large extent on the internal stability. Therefore, high-pressure
water guns cannot be used to clean the rotary drive, and the
pressurized water will penetrate the seal and enter the interior of
the rotary drive, which will greatly reduce the service life.
Vertical Slew Drive Performance Parameters
Model | Ratio | Rated Output Torque | Tilting Torque | Axial Load | Radial Load | Holding Torque | Efficiency | Precision | Self-locking | Weight |
N.m | N.m | kN | kN | N.m | degree | Yes | kg | |||
3" | 31:1 | 300 | 1500 | 3.6 | 15 | 7000 | 40% | ≤0.1 | Yes | 13kg |
5" | 37:1 | 637.5 | 5000 | 16 | 27 | 9200 | 40% | ≤0.1 | Yes | 18kg |
7" | 57:1 | 1750 | 7000 | 34 | 58 | 13200 | 40% | ≤0.1 | Yes | 28kg |
8" | 51:1 | 2250 | 11200 | 50 | 80 | 20400 | 40% | ≤0.1 | Yes | 35kg |
9" | 61:1 | 4300 | 16000 | 60 | 130 | 27200 | 40% | ≤0.1 | Yes | 51kg |
12" | 78:1 | 5600 | 25000 | 77 | 190 | 40560 | 40% | ≤0.1 | Yes | 61kg |
14" | 85:1 | 6750 | 48000 | 110 | 230 | 44200 | 40% | ≤0.1 | Yes | 78 kg |
17" | 102:1 | 9460 | 67000 | 142 | 390 | 53040 | 40% | ≤0.1 | Yes | 105 kg |
21" | 125:1 | 16000 | 89000 | 337 | 640 | 65000 | 40% | ≤0.1 | Yes | 185 kg |
25" | 150:1 | 21450 | 112000 | 476 | 950 | 89000 | 40% | ≤0.1 | Yes | 244 kg |
Maintainance
Proper and regular lubrication is required to ensure stable
operation and long service life of the slewing drive. Grease is
conducive to the better functioning of the rotary drive, reducing
wear, reducing noise during operation, extending service life and
reducing heat generation.