Latest Single Axis Solar Tracker Self Cleaning
Working principles:
Compared with the traditional bracket system with fixed inclination
angle, single axis automatic tracker system has obvious advantages
of reliability and cost performance, stronger sand prevention
ability and fault identification ability, more flexible response,
and the power generation capacity increases by 10%-20%.
During the tracking stage, the system will automatically issue
instructions according to the tracking range to control the
operation of the electric actuator, and adjust the tracking Angle
every once in a while (so as to make the photovoltaic modules
always align with the position of the current sun.Under bad weather
conditions, the upper computer communication system tells the
control system there is a strong wind weather, sends out
instructions, tells the control system, the control system pushes
the motor, and the bracket makes corresponding actions to avoid bad
weather.
Functions:
1. Max terrain tolerance in N-S direction up to 15%.
2. Excellent compatibility with all the solar modules available on
the market, framed, frameless and bi-facial.
3. Independent 2P module design, which reduces the quantity of
posts and the installation cost significantly.
4. Free obstacles among trackers in N-S direction, easy to maintain
and clean.
5. Design configured with one single set of controller, which
ensures point-to-point real-time monitoring, easy to detect fault
points in time and reduce output loss.
6. Slew drive design, with high transfer efficiency and good
environmental adaptability, the drive unit can be maintained free
for 25 years;
7. Adopt the form of self-power supply, without external power
supply;
8. Independently developed MCU microcomputer control system;
Advantages:
1. Max terrain tolerance in N-S direction up to 15%.
2. Excellent compatibility with all the solar modules available on
the market, framed, frameless and bi-facial.
3. Independent 2P module design, which reduces the quantity of
posts and the installation cost significantly.
4. Free obstacles among trackers in N-S direction, easy to maintain
and clean.
5. Design configured with one single set of controller, which
ensures point-to-point real-time monitoring, easy to detect fault
points in time and reduce output loss.
Technical Parameters of Latest Single Axis Solar Tracker Self
Cleaning
Technical parameters |
Tracking Range | 士 60° |
Driving System | Slew drive, 28VDC motor |
Modules per Tracker | Max.90 modules per tracker |
System Voltage | 1000 V or 1500 V |
Ground Coverage Ratio | ≥ 25% |
Foundation Options | All foundation types |
Terrain Adaption | Up to 20% N-S slope |
Structure Material | Hot dip galvanized steel |
Power Consumption | 0.2-0.5kWh/day |
Power Supply Mode | Powered by PV strings, back-up lithium battery |
Standard Design Wind Speed | 18m/s |
Module Supported | All commercially available modules |
Operation Temperature | -40℃ - 70℃ |
Control Algorithm | Astronomical algorithms + Tilt sensor close loop |
Tracking Accuracy | ≤ 1° |
About us:
Good Future Solar is a high-tech company in the clean energy
industry, registered in China. With the mission of developing clean
energy and protecting the environment, we believe that through
close cooperation with domestic and foreign customers, we will
continue to innovate in technology and management, and create a
bright future of clean energy!