10 SMD LED Solar Motion Security Lights Outdoor 3.2V 65LM

10 SMD Led Outdoor Solar Security Light With Motion Sensor In 65 Lumen

• APPLICATION

It was originally designed for plastic toilet facilities, but also can be used for a 

variety of applications. Such as canopies for bikies, sheds, plastic toilet, garages, 

carports, roof, etc. 

• INSTALLATION

Easily cut a hole of 52mm diameter in roofing plate and insert the light through, 

screwing the b;ack holding plate and clear lens cover back on one in piece. The light 

will turn on automatically at night when movement detected.

• OPERATION

The light comes with day/night sensor and also PIR motion sensor. 

It will be activated when people present or move in the detecting zone. 

The light will last on as long as movement being detected and it will turn off in 

45 seconds after people leaving detecting zone. 

• PARTS

1--- 1 x LED lamp and integrated solar panel

2---1 x Operation Manual

• FEATURES

1. Solar panel: polycrystalline 4V, 260mA

2. Rechargeable battery: lifepo4 battery 3.2V, 1200mAh

3. LED: 10 pieces supper bright LEDs

4. Max.Output Lumen: 65 lumens

5. Operation mode: Light sensor and PIR motion sensor

6. Delay time:45 seconds

Notes

• To avoid the rain leak in through the driving hole, it is suggested to add a

round soft material between light and holding plate or use glass cement to glue 

all round of the light.So that water will not leak into the house and even vapor

cannot goes into the lamp.

• For first time use,make sure the switch is on and leave it for sun charge,

8 hours at least.

• The light is not suggest to install where have intense air flow or over cold

or over heat place,such as air-condition, as these will influence the PIR sensor function.

• The battery is set in the light. When you are going to replace the old battery,

please be mind of the battery polarity.