Home Companies ZHEJIANG PNTECH TECHNOLOGY CO., LTD

Photovoltaic Single Core Solar Cable 4mm H1Z2Z2-K PV1-F For Solar Panel

ZHEJIANG PNTECH TECHNOLOGY CO., LTD

Contact Us

[China] country

Trade Verify

Address: NO.1 NORTH OF ZHONG YI AVENUE, GULIN,HAISHU, NINGBO, P.R.CHINA 315010

Contact name:Rainbow Young

Inquir Now

ZHEJIANG PNTECH TECHNOLOGY CO., LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Photovoltaic Single Core Solar Cable 4mm H1Z2Z2-K PV1-F For Solar Panel

Country/Region china
City & Province ningbo zhejiang
Categories Electrical Wires
InquireNow

Product Details

 

H1Z2Z2-K PV1-F Photovoltaic Solar Cable 4mm TUV 2Pfg1169 0.6/1kv for solar panel

 

Updated harmonised (H1Z2Z2-K) European standard solar cable intended for the interconnection within photovoltaic
systems such as solar panel arrays. Suitable for fixed installations, internal and external, within conduit or systems, but not direct burial applications. Our solar cable is ozone-resistant according to BS EN 50396, UV resistant according to HD 605/A1, and is tested for durability according to EN 60216. For installations where fire, smoke emissions and toxic fumes create a potential risk to life and equipment.

 

Construction 

 

(1) Conductor: Tinned annealed copper
(2) Insulation:120°C XLPE , black
(3) Jacket:120°C XLPE , black or red

 

TypeCross SectionStrand DesignConductor DiameterConductor ResistanceOuter DiameterRated VoltageRated Current
H1Z2Z2-K 1x4mm24mm256x φ0.3mm2.6mm5.09 Ω/km5.7mm1500VDC55A

 

Applications
 

Single conductor, sunlight-resistant, photovoltaic wire rated 90°C wet or 105°C dry 2000V for interconnection wiring of grounded and ungrounded photovoltaic power systems as described in Section 690.31(A) and other applicable parts of the National Electrical Code (NEC), NFPA 70
 

Options:
 

Colored phase ID stripes available on request
Multi-plexing available on request
 

Features:
 

Rated 90°C wet and dry
Deformation-resistant at high temperatures
Excellent moisture resistance,
Stable electrical properties over a broad temperature range
Excellent resistance to crush and compression cuts
Resistant to most oils and chemicals
UV/sunlight-resistant
Meets cold bend test at -40°C

 

Product NameTUV Standard Solar Cable
Model NO.H1Z2Z2-K 1x 4mm2
VoltageHigh Voltage Cable
Insulation MaterialXLPE
Material ShapeRound Wire
CertificationROSH, CE, TUV
StandardsTUV EN50618
Cores1 Core
Transport PackageIron-Wooden Drum, Iron Drum
ApplicationConstruction, Underground, Industrial, Power Station
Sheath MaterialXLPE
Wire Core MaterialTinned Copper
Cross Section4mm2

 
 

NamePV Cable
The product descriptionWidely used in indoor and outdoor solar installations, electrical installation, indoor and outdoor, explosion-prone areas, factories, industrial and agricultural industries.
Product featuresLow smoke without halogen, good cold, ultraviolet, ozone - resistant and weather - resistant.
Flame retardant, cutting resistance and penetration resistance.
Cable protection level Ⅱ level.
With 150 ℃ photovoltaic cable radiation as insulation materials, halogen free flame retardant is halogen-free, non-toxic modified polyethylene thin hengjing resin as the main raw material, add halogen-free, non-toxic, flame retardant, heat stabilizer, eliminate smoke agent, preservative, such as fertilizer, does not contain halogen, heavy metals, phosphorus.
It conforms to ROHS, and the insulation resistance is small after immersion.
Electrical1. The dc resistance: the finished cable at 20 ℃ conductive wire core dc resistance is not greater than 5.09 Ω/km
2. The insulation resistance: the finished insulation resistance of cable at 20 ℃ should not less than 1014 Ω. Cm, finished cable insulation resistance at 90 ℃ is not less than 1011 Ω. Cm
3. The sheath surface resistance: resistance of the finished cable sheath surface should be not less than 109 Ω.
Cable structureConductor: tinned copper wire 2.5, 4, 6, 10, 16 mm ^ 2 PV1 - F
25, 16 and 10, 6, 4, 2 mm ^ 2 PV wire
Insulation: > 0.5mm thick with low smoke and halogen material, and meet the specified limit of the customer.
Sheath: low smoke and halogen free material thickness > 0.5mm.
Detailed parametersAmbient temperature: - 40 ℃ ~ + 90 ℃
The highest temperature of conductor: 120 ℃ (allow 5 s in short circuit temperature 200 ℃)
Limited voltage: AC0.6/1kv dc1.8kv.


(We also produce single core of 2.5mm2, 6mm2, 10mm2 and 16mm2, as well as dual cores,
please consult me directly if necessary)
 
Pictures of 4mm2 DC XLPE solar Cable
 

Hot Products

H1Z2Z2-K PV1-F Photovoltaic Solar Cable 4mm TUV 2Pfg1169 0.6/1kv for solar panel Updated harmonised ...
TUV double XLPE insulation EN50618 H1Z2Z2-K 2.5mm dc pv cable Black Red Tinned Copper ecer({videoId:...
TUV CE CQC Black and Red Single Core Solar Cable 4mm2 for solar power system Features: Rated 90°C ...
TUV Ozone Resistant solar panel cable 4mm Excellent Resistance To Abrasion XLPE Advantages of H1Z2Z2...
1meter 4mm ON GRID Oxygen Free Copper Black Red wire Solar PV Cable Single Core ecer({videoId:...
10AWG Electrical Wire Oxygen Free Copper 1500VDC Red Black single core cable 6mm Specification : ...