|
[China]
Trade Verify
Address: 4/F, Block C, HeHengXing Science & Technology Park, 19 MinQing Road, LongHua District, Shenzhen City, GuangDong Province, China
Contact name:Sun
Shenzhen Socay Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
SOCAY Power NTC Thermistor MF72-SCN20D-20 20Ω 20mm Imax Wide Resistance Range
DATASHEET:MF72-SCN20D-20_v2105.1.pdf
| Features | Halogen-free RoHS (HF) Body size: 13mm Radial layer of lead pool High power Wide range of obstacles Effectiveness Your temperature: -40 ~+200 ℃ Agency approved: UL /cUL/RoHS | |||||
| Recommended Applications | Switch mode power supply Electric motor Transformer Adapter Projector Halogen lam LED driver circui | |||||
| Storage Conditions of Products | Storage Conditions: Storage Temperature: -10℃ ~ +40℃. Relative Humidity:≤ 75%RH. Keep away from corrosive atmo Period of Storage: 1 ye | |||||
| Part Number Code |  | |||||
| (1) MF72: MF72 Series. (2) SCN: Socay NTC (3) 10D: Zero Power Resistance at 25℃(R25):8 (4) Body Size: 13=Ф13mm | ||||||
Electrical characteristics:
| Part Number | Resistance at 25℃ ±20% | Max. Permissible Working Current | Resistance under Load (mΩ) | Dissipation Factor | Thermal Time Constant | Maximum permissible capacitance @240Vac |
| R25(Ω) | Imax(A) | (mΩ) | δ(mW/℃) | τ(Sec.) | C(uF) | |
| MF72-SCN10D-9 | 8 | 4 | 194 | 15 | 60 | 330 |
Maximum Power Rating(Pmax)
Dimensions and Structure (Unit: mm)
| D max | T max | P max | F | H | Lshort / Llong | d | Type |
| 14.5 | 14.5 | 3 | 7.5±0.5 | -- | 7±1/20±1 | 0.75 | S |
| 14.5 | 14.5 | 3 | 7.5±0.5 | 20.5±1 | 4±1/20±1 | 0.75 | K/V/D |
Packing:
Dependability:
| Item | Test conditions / Meth | Test Result | |||||
| Tensile Strength of Termin | Fasten body with a Load Applied to each lead 3.0 | No break out and damage | |||||
| Bending Strength of Terminals | Fixed body hand 1.0kg on one terminal bend 90 then back again oppsite. | No break out and damage | |||||
| Solder Ability | When the Lead wire was dipped into bath 0f 235 ± 5 ℃ for 3 seconds
after immersion in 25% rosin flux the solder ability ratio of lead wire surface should more than 95% | More than 95% so | |||||
| Temp. Cycle Tes | (-40℃×→+25℃×3min) × 5Cycles (-85℃×→+25℃×3min) × 5Cycles | ∣ΔR/R∣≤ ±20% | |||||
| Humidity Test | 45℃ 95%RH×1000 hours | ∣ΔR/R∣≤ ±20 % | |||||
| Load Life | 6 AMP×1000 hou | ∣ΔR/R∣≤ ±20 % | |||||
| Insulation Test | DC 700 | R≥500MΩ | |||||
Product Display
Company Profile:
FAQ
Please feel free to contact us if you have any question.
Contact Person: Aria Wei
Tel/WhatsApp/Wechat/Skype: +8615778830733
Email Address: sc72@socay.com
Website: www.socay.com / www.socay.en.alibaba.com
Address: Floor 4, Building C, Hengxing Science park, No.19 Minqing Road, Longhua District, Shenzhen
Other hot product
