|
[China]
Trade Verify
Address: 4/F, Block C, HeHengXing Science & Technology Park, 19 MinQing Road, LongHua District, Shenzhen City, GuangDong Province, China
Contact name:Qiu
Shenzhen Socay Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
P0080SA @10/700μS,2KV Surface Mount Thyristor Surge Suppressors (TSS) Low Voltage Overshoot
DATASHEET: PXXX0SA_v2103.1.pdf
| Part Number | Marking | VDRM @IDRM=5μA | VS ① @100V/μS | VT @IT=2.2A | IS | IT | IH | C0 ② @1MHz, 2V bias |
| V min | V max | V max | mA max | A max | mA min | pF typ | ||
| P0080SA | P008A | 6 | 25 | 4 | 800 | 2.2 | 50 | 50 |
| P0300SA | P03A | 25 | 40 | 4 | 800 | 2.2 | 50 | 70 |
| P0640SA | P06A | 58 | 77 | 4 | 800 | 2.2 | 150 | 50 |
| P0720SA | P07A | 65 | 88 | 4 | 800 | 2.2 | 150 | 50 |
| P0900SA | P09A | 75 | 98 | 4 | 800 | 2.2 | 150 | 45 |
| P1100SA | P11A | 90 | 130 | 4 | 800 | 2.2 | 150 | 45 |
| P1300SA | P13A | 120 | 160 | 4 | 800 | 2.2 | 150 | 45 |
| P1500SA | P15A | 140 | 180 | 4 | 800 | 2.2 | 150 | 40 |
| P1800SA | P18A | 170 | 220 | 4 | 800 | 2.2 | 150 | 40 |
| P2300SA | P23A | 190 | 260 | 4 | 800 | 2.2 | 150 | 35 |
| P2600SA | P26A | 220 | 300 | 4 | 800 | 2.2 | 150 | 35 |
| P3100SA | P31A | 275 | 350 | 4 | 800 | 2.2 | 150 | 30 |
| P3500SA | P35A | 320 | 400 | 4 | 800 | 2.2 | 150 | 30 |
Notes: ① Vs is measured at 100KV/s. ② Off-state capacitance is measured in VDC=2V, VRMS=1V, f=1MHz. | ||||||||
Description:
PXXX0SA Series are designed to protect broadband equipment such as
modems, line card, CPE and DSL from damaging over-voltage
transients.
The series provides a surface mount solution that enables equipment
to comply with global regulatory standards.
Features:
u Low voltage overshoot u Low on-state voltage u Does not degrade surge capability after multiple surge events within limit u Fails short circuit when surged in excess of ratings u Low Capacitance |
Applicable Global Standards:
u TIA-968-A u ITU K.20/21 Enhanced level u ITU K.20/21 Basic Level u GR 1089 Inter building u GR 1089 Inter building u IEC 6100-4-5 u YD/T 1082 u YD/T 993 u YD/T 950 |
| Parameter | Definition |
| IS | Switching Current - maximum current required to switch to on state |
| IDRM | Leakage Current - maximum peak off-state current measured at VDRM |
| IH | Holding Current - minimum current required to maintain on state |
| IT | On-state Current - maximum rated continuous on-state current |
| VS | Switching Voltage - maximum voltage prior to switching to on stat |
| VDRM | Peak Off-state Voltage - maximum voltage that can be applied while maintaining off state |
| VT | On-state Voltage - maximum voltage measured at rated on-state current |
| C0 | Off-state Capacitance - typical capacitance measured in off state |
| Series | 2/10μS1 | 8/20μS1 | 10/160μS1 | 10/560μS1 | 10/1000μS1 | 5/310μS1 | ITSM 50/60 Hz | di/dt | |
| 2/10μS2 | 1.2/50μS2 | 10/160μS2 | 10/560μS2 | 10/1000μS2 | 10/700μS2 | ||||
| A min | A min | A min | A min | A min | A min | A min | Amps/µs max | ||
| A | 150 | 150 | 90 | 50 | 45 | 50 | 20 | 500 | |
Notes:
|
- Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP ratings applicable over temperature range of -40ºC to +85ºC - The device must initially be in thermal equilibrium with -40°C < TJ < +150°C
| ||||||||
| Lead Material | Copper Alloy | |
| Terminal Finish | 100% Matte-Tin Plated | |
| Body Material | UL recognized epoxy meeting flammability classification 94V-0 |
| Part Number | Component Package | Quantity | Packaging Option | Packaging Specification | |
| Pxxx0SA | DO-214AA | 2500 | Tape & Reel -12mm/13″tape | EIA -481 - D |
