High TG Multilayer Circuit Board HASL Lead Free UL Certificated

High TG Multilayer Circuit Board HASL Lead Free UL Certificated

About us:
Was founded in year of 2010 .With being OEM manufacturer specializing in PCB/PCBA Sensors etc with 11-year,nowadays,we have built up our strong product research and development center and we are devoting ourselves to electronics smart

product. combined with the wealth of experience and expertise we have built up over the years, means we can offer a total solution to our customers one stop Service
requirements – from front end engineering through to in time deliveries.

Our PCBA Capability

SMT, PTH, mixed technology

SMT: 2,000,000 solder joints per day

DIP: 300,000 joints per day

Ultra fine pitch, QFP, BGA, μBGA, CBGA

Advanced SMT assembly

Automated insertion of PTH (axial, radial, dip)

Cleanable, aqueous and lead-free processing

RF manufacturing expertise

Peripheral process capabilities

Pressfit back planes & mid planes

Device programming

Automated conformal coating

For E-Test

Universal Tester

Flying Probe Open/Short Tester

High power Microscope

Solder ability Testing Kit

Peel Strength tester

High Volt Open & Short tester

Cross Section Molding Kit With Polisher

1. PCB manufacturing
Needed: Gerber file(main), .Pcb.Doc and KiCAD-PCB, etc.
2. Components sourcing
Needed: BOM list included detailed Part number and Designator.
3. PCB assembly
Needed:PCB file and BOM list.
Our sales & engineer teams will reply you completely PCBA Quotation within 12 hours.
PCB Making
Layers: 1-58 layers
(Main advantages from 2 layers, 4layers 6 layers, 8 layers hdi to 20layers.)
Max.Thickness:
HASL lead free is 0.6-4.0mm; ENIG is 0.2-7.0mm; Siliver: 0.4-5.0mm;
Material: FR-4 TG170 TG180 in mass production
(Shengyi S1141,S1165,S1600, IT180A,etc.)
Min.Width/Spacing: 0.1mm in hdi, and 0.15-0.2mm for standard making.
Max.Copper Thickness: 0.5oz-12oz heavy copper
Min. Hole Size: Laser drill is 0.1mm-0.15mm | ±0.05mm (4-6mil±2mil)
Max. Panel Size: 1150mmx560mm
Aspect Ratio: 12:1 and 8:1 in mass production
Surface Finish: HASL lead free,Immersion Gold, Immersion Silver mainly.
Special Process:
Buried Hole, Blind Hole, Embedded Resistance, Embedded Capacity,
Hybrid, Partial hybrid, Partial high density, Back drilling and Impedance control.

FAQ

Q. What service can you supply ?

ZYX are OEM PCB and PCBA manufacturer since 2010 ,we can provide turnkey solutionincluding RD PCB fabrication,SMT and assembly PCBA inside the enclosure,Functiontesting and other value-added service.

Q. What file you need to prepare if you want to get an quotation from us?

For PCB board, you need to prepare files of Gerber file,it should including RS-274X,ODB++, DXF, PCB, PCBDOC etc formats.

For PCBA(PCB with soldered components), except the file for PCB, you also need to prepare the BOM list (components list), Pick and Place file(txt format), real sample pictureor 3D PDF version file etc.

Q. Do you have any MOQ Limited ?

We havent any limited about MOQ .Sample and mass production all can support.

Q. How to keep our product information and design file secret ?

We are willing to sign a NDA effect by customers side local law and promising tokeep customers data in high confidential level.

Q. How long does it take for PCB and PCBA Quote ?

PCBs quotation within 2 hours can finished the PCBA depend on the components

quantity,if simple, within 6 hours can finished,once complex and more,the 12- 36 hours

can be finished.

*Please note that the following detail will speed up evaluation:

Material:

Board thickness:

Copper thickness:

Surface finish:

Solder mask color:

Silkscreen color:

Q. How about the delivery?

Normally, for sample order, our delivery is about 5 days.For small batch, our delivery is about 7 days.

For mass production batch, our delivery is about 10 days.

But that depends on the real condition when we get your order.

If your order is urgently please contact us directly ,we will priority to deal it and do ourbest to give you satisfied delivery time.

Q. How can we guarantee you receive an good quality product?

For PCB, we will use Flying Probe Test, E-test etc. for it.

For PCBA, we need you to offer us a method or test fixture for the function test.Before that, our inspectors will use microscope and X-ray to check the IC footwelding or bad solder etc.

Q. With payment terms do we acc