Active Member
|
[China]
Address: Xianyangchen Industrial Zone, Hongqiao, Wenzhou City,Zhejiang,325608,China
Contact name:Li
ZHEJIANG BOZHONG ELECTRIC CO., LTD |
|
|
Preheating to 100°C for 45 sec. max. Keep flux flush with top surface of PCB; do not apply to component side of PCB and area where terminals are located. Soldering to 255°C for 5 sec. max. Clean by brushing on solder surface. Do not clean switch with solvents.
Features.
Snap in type terminal, directly mounted in PCB.
Output terminal can be also used as jumper leads.
Through hole terminal with plastic cover available.
Spec.
| Model No. | TS-D004 | |
| Terminal Type | DIP | |
| Switch Rating | 50mA DC 12V | |
| Operation Travel | 0.2±0.1mm | |
| Operation Tpye | Momentary | |
| Operation Force | 160/180/250 gf | |
| Operation Life | 300,000 Cycles | |
| Contact Resistance | ≤100mΩ max | |
| Insulation Resistance | ≥100MΩ/m DC 250V | |
| Dielectric Strength | AC 250V/m 50Hz | |
| Operation Temperature | -30℃ to + 85℃ | |
| Operation Humidity | 25-85% RH | |
| Solder Ability | 260±5℃ for 3 seconds | |
Drawing.
