Active Member
|
[China]
Address: Unit E, NO.11 XiYuan Eight Road, XiHu District, HangZhou City, Zhejiang Province, China.
Contact name:Monica Yu
POWERFLOW CONTROL CO,. LTD. |
|
|
1. Product description
1500 series smart valve positioner can be mounted on the pneumatic
actuator as a control device for valve opening. According to a 4 to 20mA electric input signal from a higher-level
control system or a control device to control air intake and
exhaust of the pneumatic actuators to control the valve position.
2. Technical Data
| Material | PC,PA6-GF30,SI |
| Power supply | 24V DC ±10% |
| Set-point signal | 4 - 20 mA |
| Input resistance for set-point signal | 120Ω |
| Ambient temperature | 0 - 70° |
| Pneumatic connection | Plug-in hose connector G1/4 (internal Φ6mm) |
| Electrical connection | M12 3-pins B-code (cable Φ 4-6mm); M12 4-pins D-code (cable Φ4-6mm) |
| Supply pressure | 3-7 bar, specific values depending on the actuator |
| Air flow rate | 17 L/min (Sup=0.6MPa); 58L/min (Sup=0.6MPa) |
| Stroke control range | Linear 5-50mm; Rotary 90° |
| Installation | As required, preferably with actuator in upright position, screw |
| Protection class | IP66 |
| Power consumption | ＜5W |
3. Product type selection
4. Dimensions
5. Additional software functions
6. Schematic diagram
