Home Companies POWERFLOW CONTROL CO,. LTD.

Double Acting Pneumatic Angle Seat Valve

POWERFLOW CONTROL CO,. LTD.
Active Member

Contact Us

[China] country

Address: Unit E, NO.11 XiYuan Eight Road, XiHu District, HangZhou City, Zhejiang Province, China.

Contact name:Monica Yu

Inquir Now

POWERFLOW CONTROL CO,. LTD.

Double Acting Pneumatic Angle Seat Valve

Country/Region china
City & Province hangzhou zhejiang
Categories Valves
InquireNow

Product Details

2710 Series Double-Acting Pneumatic Angle Seat Valve Normal-close(NC)

 

1. Description


Valve is closed(open)with spring force, when the piston is actuated by compressed air, valve is open(closed). For the double acting type, the valve is open and closed by compressed air.

 

2. Technical Data


Fuild PressureMax 1.6MPa(232psi)
Control Pressure0.3-0.8MPa(43.5-116psi)
Control FluidNeutral gas, Air
Body MaterialCF8M/CF8
Seals MaterialCF8
Actuator Size40mm, 50mm, 63mm, 90mm, 125mm
Applicable FluidWater, Alcohol, Oil, Fuel, Steam, Neutral gas or liquid, Organic solvent, Acid and lye
Fluid ViscosityMax 600 mm²/s
Fluid Temp.-10-180℃; 25-220℃
Ambient Temp.-10-80℃
Control TypeNormal-close, Normal-open, Double-acting
ConnectionThread(BSP, BSPT, NPT), Welded, Flanged, Tri-clamp

4. Pressure data sheet


  • Double Acting, Normally Close(NC)-Enter Above Seat(No Water-hammer)
SizeThread endOrifice(mm)Kv(m²/h)Actuator(mm)▲P(MPa)Control Pressure(MPa)
DN10G3/8''133.8400-1.60.3-0.45
500-1.60.3-0.35
DN15G1/2''134.7400-1.60.3-0.45
500-1.60.3-0.35
DN20G3/4''189.5500-1.60.3-0.4
DN25G 1''2418.1500-1.60.3-0.45
630-1.60.3-0.35
900-1.60.2-0.25
DN32G1-1/4''3123.1630-1.60.3-0.55
900-1.60.2-0.35
DN40G1-1/2''3532.9630-1.60.3-0.65
900-1.60.2-0.4
DN50G 2''4552.8630-0.90.3-0.7
900-1.60.2-0.45
1250-1.60.2-0.3
DN65G2-1/2''6182.6900-1.60.2-0.6
1250-1.60.2-0.4
DN80G 3''801271250-1.60.2-0.7

 

Suitable for higher ▲P; valve could be closed if there is emergency.


5. Selection


Hot Products

2710 Series Double-Acting Pneumatic Angle Seat Valve Normal-close(NC) ​1. Description Valve is ...
2710 Series Normal-open(NO) Pneumatic Angle Seat Valve ​1. Description Valve is closed(open)with ...
2800 Series DIN Standard Flange Connection Pneumatic Diaphram Valve ​1. 2800 Product Features High ...
2800 Series Thread Connection Pneumatic Diaphram Control Valve with EPDM Seal ​1. Description The ...
2800 Series Single-acting Pneumatic Diaphram Control Valve with Thread Connection 1. Product ...
2800 Series SS316 Pneumatic Diaphragm Control Valve for -20-180℃ Working Temperature with Positioner ...