540L 28kHz Heat Exchanger Cleaning Tank 142 Gallon SS

Skymen 540L big capacity SUS304 stainless tank industry ultrasonic cleaner for Heat exchanger cleaning machine 142 Gallon Marine Parts Industrial Ultrasonic Cleaner Oil Rust Dust Remover 

Including

• 1 x Ultrasonic Cleaner
• 1 x Cleaning Basket
• 1 x Instruction Manual

Specifications:

Larger ultrasonic tanks usually feature heavier duty wall construction and additional wall support. Heat may be supplied in a variety of ways including electric immersion heaters, steam coils, and/or external heat exchangers. Larger tanks may have either diaphragm-bonded transducers, or immersibles which are transducers bonded into a stainless steel can which is then mounted in the cleaning tank. The advantages of immersibles are that a can may be swapped out if required without the whole tank going down, and immersibles can often be retrofitted into existing process tanks to improve cleaning performance.

What ultraosnic can do ?
Automotive Ultrasonic Cleaners is primarily an aqueous tank systemthat uses ultrasonic energy to remove dirt, grease, oiland baked-on carbon from parts. Contaminants such aspaint, rust, glued-on gaskets, and heavy layers of bake don carbon can also be removed by ultrasonic cleaning but require more aggressive chemistries. Unlike someother cleaning processes, ultrasonic cleaning will notdamage intricate, lightweight, or easily damaged parts.

Ultrasonic cleaners remove dirt, oils, lubricants, carbon, rust,and other types of grime that build up on heat exchangers.

ultrasonic cleaners can restore heat exchanger to look and function like new.

Ultrasonic parts washers are particularly effective for metal parts; the gentle yet powerful process is much less damaging than traditional cleaning methods that use a brush and high-velocity chemical cleaning solutions. Ultrasonic cleaners use water based solutions that won’t damage filters yet reach every crack and crevice of the heat exchanger. Ultrasonic cleaning uses a process called cavitation where microscopic bubbles form from ultrasonic waves, then implode on the part’s components; thereby vigorously yet gently scrubbing and cleaning surfaces and crevices. No matter how stubborn the build-up, your heat exchanger tube will be restored to full working capacity.

Automotive Ultrasonic Cleaner by Cavitation Action

Cavitation action is described as the implosion of countless minute bubbles against surfaces of products immersed in the cleaning solution. Bubbles are created when generator-powered transducers bonded to the ultrasonic cleaner tank vibrate at ultrasonic frequencies measured in thousands of cycles per second or kilohertz (kHz).

Selecting the cleaning equipment is governed to a large extent by the size of molds being cleaned. Ultrasonic cleaners are available ranging from small benchtop units to industrial-sized floor-mounted equipment that can be fitted for automated cleaning and rinsing cycles. But do select a cleaner with a heater, timer and sweep mode.

Ultrasonics: The ONLY Way to Clean with Confidence

Regardless of the source of the dirt or contamination, AG Ultrasonic Cleaning Systems are designed to accommodate a wide variety of uses in diverse industries. Fast, effective and efficient, our machines will allow you to clean virtually any type of part or component. The following is just a short list of the many different types of items that have been cleaned using our systems.

• Automotive (Car, Truck, Motorcycle) See Video Below
• Aviation (Helicopters, Aircraft and Ground Support)
• Personal Boat & Marine
• Injection Molds
• Restaurants, Bakeries & Kitchens (Oven Filters, Burners, Pots, Pans, Utensils)
• Machines of All Types
• Tools, Nuts, Bolts
• Extrusion and Deburring
• Almost anything made out of metal (ferrous and non-ferrous), plastic, vinyl, and wood.

According to your requirement, Skymen can add any optional system, such as oil filtration, rinsing tank, drying tank and hydraulic lifiting, throuwing. And any size is available from us.

How It Works?

This method of cleaning uses a device which produces ultrasonic signals to clean objects that are too delicate or intricate to use by regular means. For this process sound waves of high frequency and a special cleaning solution are required. These sound wave frequencies can range between 20-400 kilo-Hertz. Since it is not easy to clean intricate or small parts this process of cleaning eliminates the need for using any harsh chemicals.
The devices used in the process of ultrasonic cleaning are called ultrasonic parts cleaners. Ultrasonic cleaners use special cleaning solutions to clean grime even from the inside of cracks in the tiniest parts. These devices are made from stainless steel and are corrosion and rust resistant.

FAQ:

Q: What's the advantage of Skymen ultrasonic cleaner?