|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC60335 Negative Pressure Vacuum Pressure Test System For Electrical Skin Stimulators
Product overview:
This Negative Pressure Vacuum Pressure Test System for beauty care appliances conforms to IEC 60335-2-113: 2016. It is suitable for verifying the outlet air vacuum pressure of appliances with vacuum or negative pressure function in electrical skin stimulators, and it shall not be greater than the vacuum pressure required by the standard to protect the human body from damage.
Technical Parameters:
| Test station | Single station |
| Electrical control method | PLC intelligent integrated control, 7-inch color man-machine touch interface operation |
| Vacuum box size | Ф50×100mm |
| Vacuum pressure reading method | The real-time data is read by the differential pressure sensor and displayed on the touch screen, then the system automatically makes a qualified judgment after reaching a stable |
| Sample connection method | Manually sealed joint connection, two standard configurations, switchable |
| Operation process | The vacuum pressure parameter is preset to 75.0kPa, the sample suction port is connected with a sealed joint, and the sample power is turned on. When the fluctuation range of the vacuum degree is less than the set value, the system automatically makes a qualified or unqualified judgment, the corresponding indicator light is on. Then the vacuum box is filled with the atmosphere automatically, the sample is removed from the test equipment, the test is completed. |
| System configuration | Electronic control part: Mitsubishi PLC with module, Weinview7-inch color touch screen, Omron relay, Chint switch, etc. Pneumatic part: Meacon controlled differential pressure sensor, Airtac solenoid valve, pipeline, joint, etc. Mechanical part: high tightness stainless steel vacuum box, integrated machine |
| Test principle diagram |  |
Working principle:
It uses a vacuum gauge to monitor the pressure change of the vacuum box of the rated volume and measure the suction force of the appliance.
Operation process
The vacuum pressure parameter is preset to 75.0kPa, the sample suction port is connected with a sealed joint, and the sample power is turned on. When the fluctuation range of the vacuum degree is less than the set value, the system automatically makes a qualified or unqualified judgment, the corresponding indicator light is on. Then the vacuum box is filled with the atmosphere automatically, the sample is removed from the test equipment, the test is completed.
