|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC60669 Clause 12.3.12 and Figure 11 Voltage Drop Tester for Plugs and Socket
Product Information:
The Voltage Drop Tester is designed and manufactured according to the standard requirements of IEC60669-1: clause 12.3.12 and figure 11, IEC60884-1: clause 12.3.12 and figure 12 and etc.
It is used to check screwless terminals shall be so designed that the connected rigid solid conductor remains clamped, even when it has been deflected during normal installation, for example, during mounting in a box, and the deflecting stress is transferred to the clamping unit.
Technical Parameters:
| Applied Standard | IEC60669-1 |
| Clause | 12.3.12 and figure 11 |
| Test Station | Single |
| Deflection Angle | 0-360° |
| Bending Direction | Towards any one of the 30°±3° difference, a total of 12 directions |
| Bending Force | 0.25 N, 0.5 N, 1.0N |
| Direction of Application | Perpendicular to the direction of the unbending wire |
| Operation Method | Manual |
| Judgement Criterion | Voltage-drop not greater than 25 mV or greater than 1 min |
