|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC 60335-1 Current-Carrying Tube Extrusion Resistance Testing Machine For Vacuum Cleaners
Product Overview For Current-Carrying Tube Extrusion Resistance Testing Machine:
Standard: IEC60335-1:2004 "Household and similar electrical appliances-Safety-Part1:General requirements"
IEC60335-2-2:2009 "Household and similar electrical appliances-Safety-Part2-2:Particular requirements for vacuum cleaners and water-suction cleaning appliances,IDT>>clause 21.101"
Samples and Limits: Hoses for Vacuum Cleaners
Test purpose: used to assess the performance of the hose of the
vacuum cleaner after being squeezed
Test principle: The system controls the motor to drive the sensor
to apply the force value, and the pressure plate will automatically
return after reaching the preset test force value after pressing
the sample.
Technical Parameters For Current-Carrying Tube Extrusion Resistance Testing Machine:
| Input Power | AC220V±10%/50-60Hz |
| Test station | Single |
| Control method | PLC control |
| Force applied method | Electrical |
| Force applied range | 10-2000N, default 1500N |
| Force accuracy | ±0.5% |
| Test speed | 10-250mm/min can be set, default 50mm/min |
| Test stroke | 0-600mm |
| Test plate | LWH=100×50×20mm, long side rounding R1 one each up and down |
| Force hold time | 0-99.9s |
| Use environment | Working temperature 0-40 ℃ humidity 30%-90% |
Product Structure For Current-Carrying Tube Extrusion Resistance Testing Machine:
1. Using LCD digital display controller, all parameter settings are processed in the form of dialog box, easy to operate.
2. Display real-time force value, peak value, speed, test times.
3. Humanized design, simple operation.
4. Printout: Built-in micro thermal printer.
5. Unit of strength: N, kN, kgf, gf, lbf are selectable.
6. Displacement unit: mm, cm, in are selectable
7. Switchable unit: Pa, kPa, Mpa, kgf / cm2, lbf / in2 are
selectable.
8. Protective measures: over-stroke protection, over-strength
protection, over-time protection, external limit protection and
many other protection methods.
9. High sensitivity, instantaneous determination of crushing and
automatic shutdown
10. English visual display
11. Test, rise, fall, return speed can be set by any input, and it
can be controlled accurately.
12. The test returns automatically and quickly after the test is
completed, avoiding long waiting and speeding up the test
efficiency.
13. High performance motor, low noise, small vibration and long
service life.
14. High-quality S-type alloy steel sensor, high precision, strong
resistance to external force and overload.
15. The outer box of the machine is made of A3 steel plate,
electrostatic powder spraying and plastic coating.
