|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC 60598-1 Creepage Distance Test Card for Measuring the Creepage and Clearance Distance
Product Information For Creepage Distance Test Card:
These test gauges conform to IEC 60598-1 clause 8.2.1, clause 11.2, and IEC60335-1 Clause 29 etc. They are used to determine the shortest path between two conductive parts, or between a conductive part and the bounding surface of the equipment, measured along the surface of the insulation, with specifications made according to the requirements.
Technical Parameters For Creepage Distance Test Card:
The set of creepage distance gauges are integrated with 30 pieces of creepage distance gauges:
1.0mm/1.05mm/1.1mm/1.2mm/1.25mm/1.3mm/1.4mm/1.5mm/1.6mm/1.7mm/1.8mm/1.9mm/2.0mm/2.1mm /2.2mm /2.4mm
/2.5mm/2.8mm/3.2mm/3.6mm/4.0mm/4.2mm/4.5mm/5.0mm/5.6mm/6.3mm/7.1mm/8.0mm/9.0mm/10.0mm
Material: Stainless steel
| Sample scope, purpose, principle, structure and use environment | |
| Sample range | Electric appliance conductive parts |
| Test purpose | Suitable for measuring the distance between two conductive parts or between a conductive part and the accessible surface of the appliance along the surface of the insulating material |
| Test principle | Stainless steel claw type to verify the creepage distance between conductive parts |
| Performance | |
| Size | 1.0,1.05,1.1,1.2,1.25,1.3,1.4,1.5,1.6,1.7,1.8,1.9,2.0,2.1,2.2,2.4,2.5,2.8,3.2,3.6,4.0,4.2,4.5,5.0,5.6,6.3,7.1,8.0,9.0,10mm |
| Specification | One set for straight and curved |
| Material | Stainless steel plate |
Samples and Restrictions For Creepage Distance Test Card:
This Electrical Clearance Measuring Gauge Creepage Distance Test Cards suitable for measuring the distance between two conductive parts or between a conductive part and the accessible surface of the appliance along the surface of the insulating material
The gauges are used to determine the shortest path between two conductive parts, or between a conductive part and the bounding surface of the equipment, measured along the surface of the insulation, with specifications made according to the requirements.
